Измерительные приборы Condtrol UniX 2 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.

31
CONDTROL DeuX /UniX
2
/UniX
3
/UniX
5
User Manual
CROSS LINE
LASER
TECHNICAL DATA
Parameter
Value
Working range/with detector
50m/100m*
leveling accuracy
±0.2mm/m
Self-leveling range
±5°
leveling duration, typically
<3 sec
operating temperature
-20°c…+50°c
Storage temperature
-40°c…+70°c
Relative air humidity, max
90%
laser type
635nm, <1 mW
laser class
ii
tripod mount
5/8''
Bat teries
3x1.5v lR6 (a a)
operating life time
20 hours
automatic switch-of f
60 min
Weight
0.39kg
dimensions
130x90x120mm
* an operating range can be dif ferent from the stated above subject to
light conditions
OPERATION
• Protect the instrument from moisture and direct sunlight.
• Protect the instrument from ex treme temperatures and temperature
fluctuations. do not leave the instrument, for example, in a car for a long
time. at large temperature fluctuations, before switching-on, it is necessar y
5 compensator interlock indicator
6 operation modes
Inserting/Replacing the Batter y
to inser t the bat teries, open the bat ter y cover G. inser t the supplied
bat teries. When inser ting, pay at tention to the correct polarity according to
the representation on the inside of the bat ter y compar tment.
When the bat ter y indicator 3
flashes red, the bat teries must
be replaced.
Attention!
always replace all
bat teries at the same time. only
use bat teries from one brand
and with the identical capacity.
Remove the at teries from the
instrument when not using it
for ex tended periods. When
storing for ex tended periods,
the bat teries can corrode and
discharge themselves.
Содержание
- 10 Установка/смена батареи; всегда заменяйте
- 12 ТЕХНИЧЕСКИЕ Х АРАКТЕРИСТИКИ
- 14 Автоматическое компенсирование
- 15 на панели управления за дается необходимый режим рабо-; Проверка точности; Влияние на точность
- 18 Точность уклона горизонтальной линии
- 20 Контроль вертикальной линии
- 22 Контроль построения ортогональных направлений (UniX)
- 23 Работа прибора с детек тором
- 24 работы с автоматическим компенсированием.
- 25 ТЕХОБСЛУЖИВАНИЕ И РЕМОНТ
- 26 Сервис и консультационные услуги:; оставляем за собой право на изменения.