Eaton 5PX 2200) - Инструкция по эксплуатации - Страница 21

614-40095-00

21

4.4  User settings

The following table displays the options that can be changed by the user.

Submenu

Available settings

Default settings

Local 
settings

Language

[English] [Français] [Deutsch] [Español] [

Русский

] 

[Português] [Italiano] [Simplified Chinese] [Japanese]
Menus, status, notices and alarms, UPS fault, Event Log 
data and settings are in all supported languages.

English
Automatic message for user 
configuration when UPS is 
powered for the first time.

Date / time

Format: [International] [US]

[US]

LCD

Modify LCD screen brightness and contrast to be adapted 
to room light conditions.

[0]

Audible 
alarm

[Enabled] [Disabled on battery] [Always disabled]
Enable or disable the buzzer if an alarm occurs.

[Enabled]

Level: [0-8]

[6]

Protected 
access

[Enabled] [Disabled]
Allow the user to lock the settings modification. Password 
is: 0577

[Disabled]

In/Out 
settings

Output 
voltage

[100 V] [110 V] [120 V] [125 V]

[120 V]

Input 
thresholds

[Normal] [Extended]
Extended mode authorises lower input voltage

(70V)

 w

itho

ut transferring to battery.

This can be used if the load can withstand low voltage 
supply.

[Normal]

Sensitivity

[High] [Low]
Low sensitivity extend the range of input frequency 
accepted before transferring to battery.

[High]

Load 
segments

[Auto start delay]

UPS:[No delay]; Group1:[3s]; 
Group2:[6s]

[Auto shutdown delay]

UPS:[Disabled]; Group1:
[Disabled]; Group2:[Disabled]

Overload 
prealarm

[10%] … [105%]

Load % when overload alarm occurs

[105%]

ON/OFF 
settings

Start/Restart

[Cold start]
[Auto restart]
[Auto start]

[Cold start] : ON
[Auto restart] : ON 
[Auto start] : OFF