Холодильник Smeg LB30AFNF - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
21
Caution
■
Install the product at the place avoiding the heat from the heater or the boiler or the
direct sunlight, with the shade and the good ventilation always.
■
Prepare the furniture possible to circulate air by referring to the size.
Install the product for air to smoothly flow via the front intake hole. If not, it may
cause to prevent the normal performance of the product.
■
Install the product at the place where no outsider enters or exits because it may
damage the power cord to cause fire.
■
If the furniture door gets too long for securing the space over the space, use the
furniture with the specified size because the furniture may be sagged down or cause
the inconvenience to use.
■
After installing the door, make sure that no lift-up is shown at the door. Make sure
that the gasket of the refrigerator door is correctly installed.
■
If the furniture has any soft material (for example, plaster), use the furniture made of
solid material because it has the weak bonding strength and may be damaged.
■
Use the furniture not twisted by heating from the product or not bent by water
generated by opening/closing the refrigerator door.
■
Install the product at the place with the correct horizontal/vertical size of the
furniture (within 1mm horizontally and vertically). If the furniture has no correct
horizontal/vertical position or the product is installed on the soft base, the side plate
may be deformed or the furniture may be slowly twisted for a long time.
(When 100kg load is applied, use the material or the structure with no gradual
deformation.)
■
Install the built-in refrigerator by two persons (one team).
■
When installing, protect the children from using the installing part or the installing
location.
■
When working, take out the screw one by one from the packaging vinyl for
preventing the damage due to being left.
■
Do not use the multi-cord because it may cause fire.
■
Before installing, make sure that the product normally operates by connecting the
power cord.
1. Note before installing
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)
