Smeg FAB50X - Инструкция по эксплуатации - Страница 18

42

User instructions

8. TROUBLESHOOTING

PROBLEM

POSSIBLE CAUSE

PROBABLE SOLUTION

Noisy during operation

- see 'noises during operation'

section

The compressor starts to function too
often or functions continuously:

- insufficient  cooling of the

compressor and the condenser:

- 

increase in surrounding
temperature;

-  doors opened often or for long

periods;

-  freezer loaded with too many fresh

foods

-  check that the back of the freezer

is properly ventilated as indicated
in section “9.1” and that the
condenser is not excessively dirty;

-  freeze less food in one go;

The compressor does not function:

-  supply cable not connected to the

electricity supply;

- 

socket not providing any
electricity. 

-  connect the supply cable;

-  contact your electricity supply

company

Refrigerator section not cooled
sufficiently

- inside 

temperature 

setting

thermostat set too low (1-2)
(provides a higher temperature
inside the appliance);

- frequent or prolonged door

opening;

-  the door does not close properly
- 

increase in surrounding

temperature.

- Turn the regulator to an

intermediate setting.

-  open the door less frequently and

for as little time as possible;

-  check that the foods are arranged

on the shelves correctly and are
not preventing the door from
closing properly, and that the floor
under the refrigerator is level;

-  check that the seal is closing

properly and is not damaged.

Door hard to open just after closing:

-  if you attempt to open the door

again just after closing it
(especially the freezer door),
considerable strength is required.
This is due to the low pressure
created by the cooling of the warm
air which has entered the freezer.