Liebherr T 1410 Comfort - Инструкция по эксплуатации - Страница 8

6.2 Cleaning the appliance

CAUTION

Risk of injury and damage as a result of hot steam!

Hot steam may damage the surfaces and cause burns.

u

Do not use any steam cleaners!

NOTICE

Incorrect cleaning damages the appliance!

u

Do not use cleaning agents in concentrated form.

u

Do not use any scouring or abrasive sponges or steel wool.

u

Please  do  not  use  any  aggressive,  scouring,  sand-,

chloride-, chemical- or acid-based cleaning agents.

u

Do not use chemical solvents.

u

Do not damage or remove the type plate on the inside of the

appliance. It is important for the customer service.

u

Do  not  pull  off,  bend  or  damage  cables  or  other  compo-

nents.

u

Do  not  allow  any  cleaning  water  to  enter  the  drain  channel,

ventilation grille or electrical parts.

u

Please  use  soft  cleaning  cloths  and  a  universal  pH-neutral

cleaning agent.

u

Please  use  cleaning  and  care  products  suitable  for  contact

with foodstuffs in the appliance interior.

u

Empty appliance.

u

Pull out the power plug.

u

Clean the vent grille regularly.

w

Dust deposits increase energy consumption.

u

Clean  plastic  outer  and  inner  surfaces  with  lukewarm

water and a little washing-up liquid.

u

Only use a soft clean cloth to wipe side walls with a paint

finish. In the case of heavy soiling, use lukewarm water with

neutral cleaning agent.*

Do  not  apply  stainless  steel  cleaning  agent  to  glass  or  plastic

surfaces to prevent them from being scratched. Darker areas at

the  beginning  and  quite  an  intensive  colour  of  the  stainless

steel surface are normal.*

u

When  soiled,  clean  stainless  steel  outer  surfaces  with  a

commercially  available  stainless  steel  cleaning  agent.  Then

apply the enclosed stainless steel care product evenly in the

direction of polishing.*

*

u

Clean drain hole: Remove deposits

with  a  narrow  instrument,  e.g.  a

cotton bud.

*

u

Clean  items  of  equipment  by  hand  with  lukewarm  water

and a little washing-up liquid.

u

Remove  the  support  rails  for  the  half  glass  shelves  for

cleaning.

u

Dismantle  door  racks  as  illus-

trated.

*

After cleaning:

u

Wipe dry the appliance and items of equipment.

u

Connect the appliance and switch it on again.

u

Put the food back inside.

6.3 Changing the interior light

max. 15 W

Socket: E14

Type of current and voltage must conform with the details on

the type plate

u

Switch off the appliance.

u

Pull  out  the  power  plug  or  switch  off

the fuse.

u

Take hold of the lamp cover.

u

As shown in the diagram, press open

the  lamp  cover  on  the  inside  at  the

front, and pull it off to the side.

u

Change the bulb.

u

Put  on  the  lamp  cover  again  and

snap it into place.

6.4 Customer service

First  check  whether  you  can  correct  the  fault  yourself  by  refer-

ence to the list (see Malfunction). If this is not the case, please

contact  the  customer  service  whose  address  is  given  in  the

enclosed customer service list.

WARNING

Risk of injury if repair work is not carried out professionally!

u

Have  any  repairs  and  action  -  not  expressly  specified  -  on

the  appliance  and  mains  cable  carried  out  by  service

personnel only. (see Maintenance)

u

Read  the  appliance

designation

Fig.  9  (1),  service

No.

  Fig.  9  (2)  and

serial  No.

  Fig.  9  (3)

off  the  type  plate

located  inside  the

appliance on the left-

hand side.

Fig. 9 

u

Notify  the  customer  service,  specifying  the  fault,  appliance

designation

  Fig.  9  (1),  service  No.  Fig.  9  (2)  and  serial  No.

Fig. 9 (3).

w

This will help us to provide you with a faster and more accu-

rate service.

u

Keep  the  appliance  closed  until  the  customer  service

arrives.

w

The food will stay cool longer.

u

Pull out the mains plug (not by pulling the connecting cable)

or switch off the fuse.

7 Malfunction

Your  appliance  is  designed  and  manufactured  for  a  long  life

span  and  reliable  operation.  If  a  malfunction  nonetheless

occurs  during  operation,  check  whether  it  is  due  to  a  handling

error.  In  this  case  you  will  have  to  be  charged  for  the  costs

incurred,  even  during  the  warranty  period.  You  may  be  able  to

rectify the following faults yourself:
Appliance does not work.

→

The appliance is not switched on.

Malfunction

8