Liebherr IGS 1101 - Инструкция по эксплуатации - Страница 7

u

Empty the appliance.

u

Pull out the plug.

- Use  soft  cleaning  cloths  and  a  multi-purpose

cleaning agent with neutral pH value.

- Only  use  food  compatible  cleaning  and  care

agents on the inside of the appliance.

u

Regularly clean ventilation grilles.

w

Dust deposits increase energy consumption.

Interior:

u

Clean  the  plastic  surfaces,  outside  and  inside,  by  hand

using lukewarm water and a little washing-up liquid.

Items of equipment:

u

Clean items of equipment by hand with lukewarm water and

a little washing-up liquid.

After cleaning:

u

Wipe dry the appliance and items of equipment.

u

Connect the appliance and switch it on again.

u

Switch on SuperFrost (see 5.5) .

When the temperature is sufficiently cold:

u

Put the food back inside.

6.3 Customer service

First  check  whether  you  can  correct  the  fault  yourself  by  refer-

ence to the list (see Malfunction). If this is not the case, please

contact  the  customer  service  whose  address  is  given  in  the

enclosed customer service list.

WARNING

Risk of injury if repair work is not carried out professionally!

u

Have  any  repairs  and  action  -  not  expressly  specified  -  on

the  appliance  and  mains  cable  carried  out  by  service

personnel only. (see Maintenance)

u

Read  the  appliance

designation

Fig.  4  (1),  service

No.

  Fig.  4  (2)  and

serial  No.

  Fig.  4  (3)

off  the  type  plate

located  inside  the

appliance on the left-

hand side.

Fig. 4 

u

Notify  the  customer  service,  specifying  the  fault,  appliance

designation

  Fig.  4  (1),  service  No.  Fig.  4  (2)  and  serial  No.

Fig. 4 (3).

w

This will help us to provide you with a faster and more accu-

rate service.

u

Keep  the  appliance  closed  until  the  customer  service

arrives.

w

The food will stay cool longer.

u

Pull out the mains plug (not by pulling the connecting cable)

or switch off the fuse.

7 Malfunction

Your  appliance  is  designed  and  manufactured  for  a  long  life

span  and  reliable  operation.  If  a  malfunction  nonetheless

occurs  during  operation,  check  whether  it  is  due  to  a  handling

error.  In  this  case  you  will  have  to  be  charged  for  the  costs

incurred,  even  during  the  warranty  period.  You  may  be  able  to

rectify the following faults yourself:
Appliance does not work.

→

The appliance is not switched on.

u

Switch on the appliance.

→

The power plug is not properly inserted in the wall socket.

u

Check power plug.

→

The fuse of the wall socket is not in order.

u

Check fuse.

The compressor runs for a long time.

→

SuperFrost is activated.

u

The  compressor  runs  for  longer  in  order  to  rapidly  cool  the

food. This is normal.

Excessive noise.

→

Speed-controlled*  compressors  may  produce  varying

running noise due to different speed steps.

u

The sound is normal.

A bubbling and gurgling noise.

→

This noise comes from the refrigerant flowing in the refriger-

ation circuit.

u

The sound is normal.

A quiet clicking noise.

→

The  noise  is  produced  whenever  the  refrigeration  unit

(motor) automatically switches on or off.

u

The sound is normal.

A hum. It is briefly a little louder when the refrigeration

unit (the motor) switches on.

→

The  refrigeration  increases  automatically  when  the  Super-

Frost, function is activated, fresh food has just been placed

in the appliance or the door has been left open for a while.

u

The sound is normal.

→

The ambient temperature is too high.

u

Solution: (see 1.2)

The SuperFrost button flashes together with the tempera-

ture display.

→

There is a fault.

u

Contact the customer service. (see Maintenance).

The temperature is not cold enough.

→

The door of the appliance is not properly closed.

u

Close the door of the appliance.

→

Insufficient ventilation.

u

Clear ventilation grilles.

→

The ambient temperature is too high.

u

Solution: (see 1.2) .

→

The appliance was opened too frequently or for too long.

u

Wait  until  the  appliance  reaches  the  required  temperature

itself.  If  not,  contact  the  customer  service.  (see  Mainte-

nance).

→

Too much fresh food was placed inside without SuperFrost.

u

Solution: (see 5.5)

→

The appliance is too close to a heat source.

u

Solution: (see Putting into operation).

→

The appliance was not inserted properly into the recess.

u

Check  whether  the  appliance  was  inserted  correctly  and

the door closes properly.

8 Decommissioning

8.1 Switching off the appliance

u

Using a coin, turn the temperature control

 Fig. 2 (1) to 0.

w

The temperature display is dark.*

8.2 Taking the appliance out of service

u

Empty the appliance.

u

Pull out the power plug.

u

Clean the appliance (see 6.2) .

u

Leave the door open to prevent odour.

Malfunction

7