Liebherr CUesf 3503 - Инструкция по эксплуатации - Страница 5

13

3 Putting into operation and controls 

*

 depending on model and options

You are advised to clean the appliance before switching it on 

for the first time (see "Cleaning").

Put the appliance into operation approximately 4 hours be-

fore loading with frozen food for the first time. Only insert 

frozen food when the freezer compartment is cold.

Switching the appliance on and off

Fig. 

A1

Switching on:

To switch on the entire appliance you only need to switch on 

the fridge section.

When the fridge section is switched on, the freezer section 

is switched on, too.

-  Briefly press the On/Off button

1

.

  The temperature displays light up. The fridge and freezer 

sections are switched on.

Switching off:

-  To switch off the entire appliance you only need to switch 

off the fridge section. The freezer section is automatically 

switched off, too.

-  Press the On/Off button

1

 for approx. 2s.

-  The temperature displays are dark. The appliance is 

switched off.

-  The interior lighting is dark.

Adjusting the temperature 

Fig. 

A1

W 

Fridge section:

The temperature depends on the following factors:

-    The frequency of opening the door

-    The room temperature of the installation location

-    The type, temperature and quantity of the frozen food

     Recommended temperature setting: 5 °C.

     The temperature can be changed progressively. When 

the setting 1 °C is reached, it begins again at 9 °C.

-    Press the adjustment button 

2

until the LED of the 

desired temperature lights up.

Note: 

Pressing the Up/Down button once activates the 

nominal value adjustment.

By pressing the adjustment button for a long time, a colder 

setting is adjusted within a small temperature range (e.g.: 

between ``5`` and ``7``), but it is not visible on the display.

W  

Freezer section:

The recommended temperature setting of 5°C in the coo-

ling section will produce an average temperature of approx. 

-18°C in the freezer section.

Temperature display 

The following are displayed in normal mode:

-    The set fridge temperature 

3

The display flashes:

-    The temperature setting is being changed

-    The temperature has risen by several degrees.