Liebherr CN 3033 Comfort NoFrost - Инструкция по эксплуатации - Страница 5

13

3 Putting into operation and controls

*

 depending on model and options

You are advised to clean the appliance before switching it on 

for the first time (see "Cleaning").

Put the appliance into operation approximately 4 hours be-

fore loading with frozen food for the first time. Only insert 

frozen food when the freezer compartment is cold.

Switching the appliance on and off

-

Fig. 

A1

:

 With the main On/Off control 

1

 you always 

switch the complete appliance

 on 

or 

off

, freezer 

and 

refrigerator compartment.

W

Switching on:

 Turn On/Off controls 

1

 and 

5

 with a 

coin, so that the 

temperature setting displays 

3

 and 

6

flash/light up

.

-   The

refrigerator compartment 

is switched on when the 

temperature setting display 

6

is lit a

nd the inside lamp is 

on.

-  The 

freezer compartment

 is switched on when the 

tempe-

rature setting display

3

is lit.

-  When operating for the first time the warning LED lights 

up and the audible alarm is turned off. 

     For more information, see section "Audible warning 

signal, red visual warning LED".

W

Switching off

 the 

complete

 appliance:

 Turn the slot of 

the main On/Off control 

1

 with a coin right back to posi-

tion "

0

", so that the temperature setting displays are

 unlit

. 

The refrigerator and freezer compartment are switched 

off.

W

  If you want to switch off only the 

refrigerator compart-

ment

, turn only the On/Off control 

5

 back to "

0

", so that 

the temperature setting display of the 

refrigerator com-

partment 

6

 and the inside lamp are unlit. The tempera-

ture setting display of the 

freezer compartment 

3

must 

be lit. 

Setting the temperature

W

  Fig. 

A1

:

Turn temperature controls 

1

 and 

5

 with a coin 

until the LEDs 

3

 and 

6

 of the required temperatures 

are lit. The positions of the slot mean:

  1

st

 dot 

=  warmest temperature

,

lowest refrigerating capacity

  max. 

=  coldest temperature

, 

highest refrigerating capacity 

W

Recommended  temperature setting:

-  

For the

 refrigerator compartment: 

5 °C

-  

For the

 freezer compartment: 

-18 °C

During setting, the LED of the set temperature flashes.
NB:

 Please note that the temperature inside the appliance 

is affected by the frequency with which the door is opened, 

how full the appliance is and the room temperature at the 

place where the appliance is installed. 

The control is to be readjusted according to the temperature 

required.

Temperature setting display, 

Fig.

 A1

/

36

-   The illuminated temperature setting display indicates 

operation of the appliance.

-   Temperature ranges are allocated to the individual LEDs. 

They indicate the selected setting of the refrigerating/

freezing temperature.

Audible warning signal, 
red visual warning LED

Fig. 

A1

/

4

: The audible warning signal and the red visual 

warning LED help you to protect the frozen food and to save 
energy.

W

  The buzzer is switched off

 by pressing the audible war-

ning on/off button 

4

,

-  and automatically when the sufficiently low storage tem-

perature has been reached again or

-  when the door is closed.

Door alarm

-  This always sounds when the refrigerator or freezer door 

is open for more than approx. 60 sec.

  The sound shut-off is active as long as the door is open. 

When the door is closed, the alarm function is automati-

cally activated again.

Temperature alarm

-  This always sounds when the freezing temperature is not 

cold enough (depending on the temperature setting). 

-  At the same time 

the red visual warning LED flashes.

Possible causes are:

-  warm fresh food was inserted for freezing, 

-  when rearranging and removing frozen food, too much 

warm air entered.

The red visual warning LED 

continues to flash

 until the 

alarm state is ended.