Viking VBI7360WRAB - Инструкция по эксплуатации - Страница 7

7

P

roduc

t C
o

ntr
ols

Settings and Functions

The ice button will turn on or turn off  ice production.  The default setting is on.  The button will illuminate in blue.  Press 
to turn off  ice production.

The “MAX ICE” button sets ice maker to full capacity.  Press “MAX ICE” button to activate.  The max ice mode sets the 
freezer to its lowest setting (-5

o

) for 48 hours and will end after function is completed.

Max freezer mode adjusts the freezer temperature to the coldest setting for 6 hours, at the end of which, the freezer 
temperature automatically returns to its previous setting.  To activate the max freezer mode, press the “MAX FRZ” button. 
The “MAX FRZ” button will glow to let you know you have turned on the max freezer mode.  To deactivate the max 
freezer mode before the end of the 6 hours cycle, simply press the “MAX FRZ” button.

The alarm sounds and the ALARM button light blinks if either door or drawer is left open for more than three minutes.  
To deactivate the door open alarm, press the “ALARM” button or close the door that is open. When the alarm sounds, a 
number will be illuminated in either the REF or FRZ digital display.  Refer to Troubleshooting Section for explanation of 
codes.

To activate / deactivate Showroom mode, simultaneously press and hold the VAC key and the ALARM key 
for 3 seconds.  The showroom mode icon will illuminate blue.  The icon will not be visible when deactivated.  
When in the Showroom Mode, all controls including regulation of temperature will be disabled except for 
the interior lights.  No error or fault codes will be displayed while in this mode.

The “FILTER” button will illuminate when it is time to change the water fi lter.  After replacing the fi lter, press button 
to reset.  Filter icon will be visible only when it is time to change the fi lter.  To replace water fi lter, refer to page 9.  For 
additional information, visit vikingrange.com

LED Lighting

Both the refrigerator and freezer compartments feature maintenance-free LED lighting.  To replace, contact an authorized service 
technician.

Setting the Temperature

When you fi rst plug your new refrigerator in, you will fi nd that the refrigerator is factory set at 38

0

F in the refrigerator and 0

0

F in the 

freezer.  Wait 24 hours after plug-in for the cabinets to reach this setting.  After 24 hours, you may adjust controls as desired.

To adjust the refrigerator or freezer temperature, press either the REF or FRZ button.  Using either the UP or DOWN toggle, set desired 
temperature.

The Bluezone technology is designed to help remove odors, reduce fl avor transfer, remove airborne 
mold, and maintain the color, texture and taste of fruits and vegetables for longer periods of 
time.  When it comes time to replace the Bluezone bulb,  Bluezone will appear along the bottom 
of the refrigerator display.  To replace the bulb, refer to page 14 .  For additional information, visit 
vikingrange.com