De Dietrich DRS1204J - Инструкция по эксплуатации - Страница 10

285690

•  Temperature of the appliance is set by turning the button (B) to 

the position between the 

Mini

 and 

Maxi

 span.

•  Recommended setting of the thermostat knob is to 

Eco

 position.

•  If the room temperature, in which the appliance is installed, is 

lower than 16°C, the recommended setting of the thermostat 
knob is to the

 Maxi

.

•  In case of exceptionally higher ambient temperatures it is 

recommended to switch the fan operation at high speed by 
pressing button (D) – only for models featuring control panel I.

• 

Super

 position 

 - 

Super

 position stands for “Super frost” and indicates fast 

freezing (certain models only).

•  In apliances with digital display the indicator 

fl

 ashes during the 

setting procedure, and the beep signals each change of preset 
temperature. When 

fl

 ashing stops the 

fi

 nal setting is stored in 

memory.

•  When the appliance is switched on, the display (A) will 

fl

 ash 

for a few seconds – the set value will be indicated. After a 
while, the actual or maximum value is indicated. This value 
will remain on the display until the actual temperature in the 
refrigerator compartment falls below the displayed level.

Fan assisted fast cooling is started by pressing the button (D). 
Orange LED is on.  Fan eliminates minor temperature differences 
between different cabinet spaces, and reduces dew formation on 
the interior surface of the appliance.
In appliances with the ZERO’N’FRESH drawer, fan boost, or fan 
assisted cooling, is automatically switched off after approximately 
6 hours.

The alarm sounds if the refrigerator door is left open for more 
than 1 minute. When the door is closed again the alarm stops.

Refrigerator temperature 
setting

Refrigerator temperature 
setting

Start of fan assisted 
cooling

(control panel I)

Start of fan assisted 
cooling

(control panel I)

Open refrigerator door 
alarm

Open refrigerator door 
alarm

10