Sharp SJWX99ABK - Инструкция по эксплуатации - Страница 39

39

ENGLISH

Automatic ice maker

How to use

Before using

• Wash the water tank and the ice storage box.

• Use ice tray cleaning mode to clean the ice tray and the 

SLSH7KHUHPD\EHRGRURUGLUWZLWKLQWKHDXWRPDWLFLFH

maker.) 

Procedure

1 

 Pour water into the water tank, and set the water 

tank.

Note

• Step 

3

'RQRWXVHRWKHUWKDQSRWDEOHZDWHUMXLFHWHD

soda and sports drink etc.) They may dirty the 

inside of the ice maker and lead to break down.

• Step 

5

'RQRWWLOWWKHZDWHUWDQN2WKHUZLVHZDWHU

may spill when you carry it. 

• Step 

5

,QVHUWWKHZDWHUWDQNVHFXUHO\,FHFXEHVDUH

not be made unless the tank is inserted fully.

Ice cubes are made automatically.

2 

 Take out ice cubes.

• 2 types of ice cube are made at the same time.

Cube

Multifaceted shape

• Ice cubes piled up at the back of the ice storage box. 

Spread them out to the front part to make more ice 

cubes.

How to assemble or disassemble water tank

1

2

• The picture above shows how to assemble the tank. 

Disassembly is in an opposite way.

Latch

Warning
Fill with potable water only.

2

3

4

1

5

Potable water 

Limit line of 

water

Latch

Note

• 

,WWDNHVDSSUR[LPDWHO\KRXUVWRPDNHWKH¿UVWVHWRILFH

cubes. 

• 

)RUK\JLHQLFUHDVRQVUH¿OOWKHZDWHURQFHDZHHNHYHQ

if water remains in the tank.

• Remove the water tank approximately once a week and 

wash it with water.

• When you leave the tank empty, it may sometimes make 

a groaning noise but this is normal. 

• Do not place the shovel or food on top of the ice cubes. 

This may cause the automatic ice maker to malfunction 

GDPDJHRIWKHGHWHFWLRQOHYHUHWFRUWKHFDVHQRW

being able to be pulled out. Set the shovel at the 

designated location. 

• Large size ice may not be made when the water level of 

the water tank is low even if large ice mode is selected. 

:KLWHLQLFHFXEHVDQGÀRDWLQJVXEVWDQFH

• The minerals contained in water may solidify and whiten 

as water freezes. Minerals turn into a state which is 

insoluble once it freezes, so melting the ice cubes will 

OHDYHRQO\ZKLWHÀRDWLQJVXEVWDQFHEXWWKLVLVQRUPDO

• This is more likely to happen when you use hard water 

HJ7KHKDUGQHVVRIWKHZDWHULVPJ/RUPRUH

Ice making takes longer when:

• The room temperature is high.
• Less cooling operation, e.g. in winter.
• Many food products are stored.
• Refrigerator is defrosting of the cooling unit.
• The door is frequently opened.
• When you restart the ice making operation.
• Energy saving mode is in operation.

Ice making right after changing the mode

• The batch of ice cubes made right after changing the  

RSHUDWLQJPRGHGRHVQRWUHÀHFWWKHFKDQJHLQVL]H

This is because there are still half-made ice cubes left 

in the ice tray when switching to the changed mode. 

,FHFXEHVRIWKHQGEDWFKRUODWHUUHÀHFWVWKHPRGH

change. 

Protrusions of ice cubes:  

There are some slits in the ice tray. 

• Therefore, the ice cubes have protrusions that caused 

by these slits. 

• The protrusions may be pointed. Be careful when putting 

the ice cube directly in your mouth.    

Shovel

Detection lever

Shovel

Ice tray

Slit

Protrusion