Холодильник Sharp SJ-GF60AR - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
49
What to do
Stop panel light
turning on at door
opening / closing
Light turning off setting on control panel is capable.
Setting
Press [ ] and [
▲
] for more than 3 seconds simultaneously (until 3 beeps sound).
The panel indication turns off.
Releasing
…Same as above (beep)
(Light turning off
setting on control
panel)
What to do
In this case
Energy saving
・
Plasmacluster (Auto)
・
Making ice cubes (except for Express
ice making)
・
Deep freezing
・
Light turning off setting on control panel
・
Temperature control (including Advanced setting)
Plasmacluster (Deodorizing)
・
Express freezing
・
Hot food freezing
・
Express ice making
・
Ice tray cleaning
・
Dew condensation prevention heater
is set "Weak "
Retain the settings
Cancel the setting
• Do not store more food nor open/close door during a power failure.
• At the time of re-power distribution, the states of each operation are as follows.
Empty the ice
tray
Power failure
Not in use for
a long time
①
Empty the ice tray. (Refer to above)
②
Unplug it.
③
Clean the inside of the refrigerator and leave the doors open for a couple of days to
let it dry. (To prevent odor or mold from generating)
①
Empty the water tank and the ice case.
②
Establish towels to a ice tray and close an ice compartment door.
③
Press [ ].
④
Press [
▲
] or [
▼
] to select “Ice Tray Cleaning”.
⑤
Press [ ] for more than 2 seconds (until sound beeps).
(Do not open the ice compartment door during operation)
⑥
When you hear the beep approx. 40 sec. later, throw away the water or ice cubes
in the ice case.
Transport wheels
(4 pieces)
• Move back and forth.
①
Empty the ice tray. (Refer to above)
②
Unplug it.
③
Remove the foot cover and raise the
adjustable feet.
④
To carry the refrigerator, lay a sheet, etc. for
protection on the path.
• Prevents scratches on the floor.
• If water remains on the evaporating pan inside the
refrigerator, it may become spilled on the floor.
⑤
Use the transport handles on the back and the
bottom of the product.
• Do not place sideways when transporting.Scratching and damage of the
machinery parts may occur as a result.
Moving /
Transporting
Evaporating pan
(You cannot see this
from the outside.)
Back of refrigerator
Items
State at the time of
re-power distribution
32
page
page
Fix with a tape, etc. to prevent
the doors from opening.
• Do not try to move
it forcibly or slide it
in the lateral
direction. It may
damage the floor.
When moving back and forth
Use the transport
wheels.
On top of the
back surface
Bottom
