LG GA-B409UCA - Инструкция по эксплуатации - Страница 61

61

38

38

3

2

3

2

24

20

21

22

11

23

21

28

27

20

25

30

33

26

25

30

27

28

29

9

31
32

36

7

6

37

9

10

34

1

4

39

10.

1

3

4

38

2

9. For exterior

    type display

7.

21

26

20

27

32

31

30

28

8.

29

21

25

9.

34

36

10

7

30

21

25

29

31

33

24

27

23

28

21

20

30

21

9

6

37

37

7. For all models

8. For all models

39

10

10. Only for models with

      exterior door handles

28

39

Reversing the doors is not covered by the warranty.

Note

Unscrew bolts     of the middle hinge   , rise up 

the freezer door     to remove it. Take off cap cover     

and install it instead of middle hinge    .

After unscrewing the screws connecting the cover 

lower    , move cover lower     to the opposite side.  

Unscrew bolts     of lower hinge     rotating it by opposite 

of clockwise and than screw it in opposite side hole. 

Unscrew the bolts    , which is fixing lower hinge     & bolt      

     on the case of the refrigerator. Unscrew the screw     

on the bottom of the case which is fixated support      

of the freezer door    , move support     to the opposite 

side in appropriated place and fix it up. 

Move the upper cap     on the opposite side.

Attach removed lower hinge     to the hole, located on 

the opposite side of the case and tighten it by screws

    . Screw in bolt     in the case of the refrigerator on 

the opposite side. After fixating  of the cover lower    , 

install freezer door     to the pin in the lower hinge     .

Turn over removed middle hinge      axis outwards, 

and tighten it by screws     (Tight carefully to prevent 

scratching of the door). 

Install the washer     on the middle hinge    .

Install the refrigerator door     through matching holes 

in the lower of the door and pin of the middle hinge    . 

Then install the upper hinge   , supplied with refrigerator 

by placing in the appropriated hole of the refrigerator 

door    . Connect the connector cable    (only for exterior 

display type models). Fix the upper hinge     by bolts     . 

Install cover upper hinge     and tighten it by screw    . 

Input the cover      which is supplied with refrigerator.

Move the cap     to the opposite side of the door. 

Install door handles         on the opposite side and fix 

them by screws    , put on the caps    .