Bosch KGN86AI30U - Инструкция по эксплуатации - Страница 9

en

9

Installation location

A dry, well ventilated room is suitable as 

an installation location. The installation 

location should not be exposed to direct 

sunlight and not placed near a heat 

source, e.g. a cooker, radiator, etc. If 

installation next to a heat source is 

unavoidable, use a suitable insulating 

plate or observe the following minimum 

distances from the heat source:

■

3 cm to electric or gas cookers.

■

30 cm to an oil or coal-fired cooker.

The floor of the installation location must 

not give way; if required, reinforce floor. If 

the floor is uneven, compensate with 

supports. 

Distance from wall

Fig. 

#

A gap is not required between the 

appliance and side wall. The containers 

and shelves are still fully extendable. 

Observe ambient 

temperature and 

ventilation

Ambient temperature

The appliance is designed for a specific 

climate class. Depending on the climate 

class, the appliance can be operated at 

the following temperatures.
The climate class can be found on the 

rating plate. Fig. 

+

Note

The appliance is fully functional within 

the room temperature limits of the 

indicated climatic class. If an appliance 

of climatic class SN is  operated at  colder 

room temperatures, the appliance 

will not be damaged up to a temperature 

of +5 °C.

Ventilation

Fig. 

$

The air on the rear panel and on the side 

panels of the appliance heats up. 

Conduction of the heated air must not be 

obstructed. Otherwise, the refrigerating 

unit must work harder. This increases 

power consumption. Therefore: Never 

cover or block the ventilation openings!

Climate class Permitted ambient 

temperature

SN

+10 °C to 32 °C

N

+16 °C to 32 °C

ST

+16 °C to 38 °C

T

+16 °C to 43 °C