Bosch KGN86AI30U - Инструкция по эксплуатации - Страница 10

en

10

Connecting 

the appliance

After installing the  appliance, wait at least 

1 hour until the appliance is switched on. 

During transportation the oil in 

the compressor may have flowed into 

the refrigeration system.
Before switching on the appliance for 

the first time, clean the interior of 

the appliance (see chapter “Cleaning 

the appliance”).

Electrical connection

The socket must be near the appliance 

and also freely accessible following 

installation of the appliance.

m 

Warning

Risk of electric shock!
If the length of the mains cable is 

inadequate, never use multiple sockets 

or extension leads. Instead, please 

contact Customer Service for 

alternatives.
The appliance complies with protection 

class I. Connect the appliance to 220–

240 V/50 Hz alternating current via a 

correctly installed socket with protective 

conductor. The socket must be protected 

by a 10 A to 16 A fuse.
For appliances operated in non-

European countries, check whether the 

indicated voltage and current type match 

the values of your electricity supply. This 

information can be found on the rating 

plate, Fig. 

+

.

m 

Warning

Never connect the appliance 

to electronic energy saver plugs.
Our appliances can be used with mains 

and sine-controlled inverters. Mains-

controlled inverters are used for 

photovoltaic systems which are 

connected directly to the national grid. 

Sine-controlled inverters must be used 

for isolated applications (e.g. on ships or 

in mountain lodges) which are not 

connected directly to the national grid.

Getting to know your 

appliance

Please fold out the illustrated last page. 

These operating instructions refer 

to several models.
The features of the models may vary.
The diagrams may differ.