Bosch KGN49XWEA - Инструкция по эксплуатации - Страница 10

en

10

Switching on the 

appliance

1. First insert the plug into the 

connection on the back of the 

appliance. Check that the plug has 

been inserted all the way.

2. Then insert the other end of the cable 

into the socket.

The appliance is now switched on and a 

warning signal sounds.
Press the alarm off button to switch off 

the audible warning signal.
The alarm off display goes out when the 

appliance has reached the set 

temperature.
The preset temperatures are reached 

after several hours. Do not put any food 

in the appliance beforehand.
The factory has recommended 

the following temperatures:

■

Freezer compartment: -18 °C

■

Refrigerator compartment: +4 °C

Operating tips

■

After the appliance has been switched 

on, it may take several hours until the 

set temperatures have been reached.

■

The fully automatic NoFrost system 

ensures that the freezer section 

remains free of ice. Defrosting is no 

longer required.

■

If the door cannot be immediately re-

opened after it has been closed, wait 

until the resulting low pressure has 

equalised.

■

The front and side panels 

of the housing are partly heated 

slightly.This prevents condensation 

from forming.

Setting the  

temperature

Fig. 

"

Refrigerator compartment

The temperature can be set from +2 °C 

to +8 °C.
1. Use the selection button refrigerator 

compartment 1 to select refrigerator 

compartment.

2. Using the temperature setting button 

6, to set the required refrigerator 

compartment temperature.

Note

To reach the selected temperature, open 

the ventilation openings to 1/3, Fig. 

&

.

Freezer

The temperature can be set from -16 °C 

to -24 °C.
1. Using the selection button freezer 

compartment 2 to select freezer 

compartment.

2. Use the temperature setting button 6 

to set the required freezer 

compartment temperature.