AEG S92500CNM0 - Инструкция по эксплуатации - Страница 15

Problem

Possible cause

Solution

The temperature in

the appliance is too

low/high.

The temperature regulator

is not set correctly.

Set a higher/lower temper-

ature.

The door is not closed cor-

rectly.

Refer to "Closing the

door".

The product temperature

is too high.

Let the product tempera-

ture decrease to room tem-

perature before storage.

Many products are stored

at the same time.

Store less products at the

same time.

The temperature in

the wine cellar is too

high.

There is no cold air circula-

tion in the appliance.

Make sure that there is cold

air circulation in the appli-

ance.

The temperature in

the freezer is too

high.

Products are too near to

each other.

Store products so that

there is cold air circulation.

Upper or lower

square is shown in

the temperature Dis-

play.

An error has occurred in

measuring the tempera-

ture. 

 Call your service represen-

tative (the cooling system

will continue to keep food

products cold, but temper-

ature adjustment will not be

possible). 

dEMo appears on the

Display. 

The appliance is in dem-

onstration mode (dEMo). 

Keep pressed approximate-

ly 10 sec. the OK button

since a long sound of buz-

zer is heard and the Display

shut off for a short while:

appliance start works regu-

larly.

REPLACING THE LAMP

The appliance is equipped with a longlife

LED interior light.

Only service is allowed to replace the

lighting device. Contact your Service Cen-

ter.

CLOSING THE DOOR

1.

Clean the door gaskets.

2.

If necessary, adjust the door. Refer to

"Installation".

3.

If necessary, replace the defective

door gaskets. Contact the Service

Center.

БКГИЕПД

15