Brayer BR2004 - Инструкция по эксплуатации - Страница 9

9

EN

•  To set the temperature, press again the button (9) «

» and set the frying plates temperature 225°С 

with the buttons (6) «+/-». The temperature digits 

(8) will be flashing for 3 seconds and then will glow 

constantly (pic. 3).

• 

Temperature setting range is from 75°С to 235°С with 

a step 10°С.

•  The grill will be switched on in preheating mode, 

the display illumination will glow orange. The 

indicator (13) « » will rotate and the preheating 

time countdown will start, the digits (7) will show the 

preheating time.

•  In 5 minutes the preheating will stop and you will 

hear 2 sound signals.

•  Take the handle (3) and open the grill, carefully 

put the food products on the lower frying plate. Be 

careful to avoid burns by splashing fat or juice from 

the products. Lower the upper part of the grill on the 

products.

•  After the preset time is over, you will hear 2 sound 

signals which mean that the preset cooking time is 

over.

•  Take the handle (3) and open the grill, put the cooked 

food in a suitable container using wooden or heat-

resistant plastic kitchen tools.

Note:

 during cooking the grill will be switching from the 

heating mode to the keep warm mode, and the display 

illumination color will be switching from orange to purple 

(pic. 4, 5).

• 

Switch the grill off by pressing and holding the 

button (10) « », disconnect the power plug from 

the socket, wait until the grill cools down completely. 

Then open the grill and wipe the frying plates.

•  Remove the tray (2) and pour the liquid out of it, 

wash the tray, wipe it and install back to its place.

Cooking a steak

•  Prepare the necessary products. 

•  To switch the grill on, press and hold the button 

(10) « » for 2 seconds, the light indicator (11) will 

light up, and the time setting digits (7) «--:--» will be 

flashing on the display.

•  To set the time, press the button (9) «

» and set 

the operation time «5:00» with the buttons (6) «+/-». 

The time digits (7) will be flashing for 3 seconds and 

then will glow constantly (pic. 6).

Note:

 after setting the time (the time digits (7) glow 

constantly) you cannot reset it. To reset the time you 

have to switch the grill off, then switch it on again and 

set the necessary time. 
•  To set the temperature, press again the button (9) «

» and set the frying plates temperature 235°С 

with the buttons (6) «+/-». The temperature digits 

(8) will be flashing for 3 seconds and then will glow 

constantly (pic. 6).

•  The grill will be switched on in preheating mode, 

the display illumination will glow orange. The