Brayer BR2004 - Инструкция по эксплуатации - Страница 10

10

EN

indicator (13) « » will rotate and the preheating 

time countdown will start, the digits (7) will show the 

preheating time.

•  In 5 minutes the preheating will stop and you will 

hear 2 sound signals.

•  Take the handle (3) and open the grill, carefully 

put the food products on the lower frying plate. Be 

careful to avoid burns by splashing fat or juice from 

the products. Lower the upper part of the grill on the 

products.

•  After the preset time is over, you will hear 2 sound 

signals which mean that the preset cooking time is 

over.

•  Take the handle (3) and open the grill, put the cooked 

food in a suitable container using wooden or heat-

resistant plastic kitchen tools.

Note:

 during cooking the grill will be switching from the 

heating mode to the keep warm mode, and the display 

illumination color will be switching from purple to orange 

(pic. 7, 8).
• 

Switch the grill off by pressing and holding the 

button (10) « », disconnect the power plug from 

the socket, wait until the grill cools down completely. 

Then open the grill and wipe the frying plates.

•  Remove the tray (2) and pour the liquid out of it, 

wash the tray, wipe it and install back to its place.

«Grill» operating mode

•  Switch the grill on by pressing and holding the 

button (10) « » for 2 seconds, press the button (12) 

«Grill», only the temperature digits (8) will appear on 

the display (pic. 2).

•  You can set the required temperature of the heating 

plates with the buttons (6) «+/-». In this mode the 

operation time 1 hour is set by default. You can 

switch the grill off at any moment by pressing and 

holding the button (10) « ».

Keep warm mode and grill automatic switch-off

• 

After the cooking cycle is finished (there were 2 

sound signals), the flashing time (7) and temperature 

(8) digits will appear on the display. The grill will 

switch to the countdown mode within 3 minutes. If 

no actions are performed within 3 minutes, the keep 

warm mode will switch on for 60 minutes (pic. 9). 

•  In 60 minutes you will hear sound signals, and the 

grill will switch off in 2 seconds (pic. 10).

MALFUNCTION SYMBOLS

•  In case of malfunction a sound signal will be heard, 

the display illumination will glow blue, the quickly 

flashing symbols «ER 1», «ER 2» or «ER 3» will be 

shown the display, the buttons on the control panel 

(8) will be inactive.