BRAYER BR2002 - Инструкция по эксплуатации - Страница 5

8

9

en

en

• 

Remove the lower frying plate (9) by pressing on the 

lock (5).

• 

Remove the tray (2) and pour the liquid out of it.

• 

Wash the frying plates (8, 9) and the tray (2) with 

warm water and neutral detergent, rinse them and 

wipe dry.

• 

Install the surfaces (8, 9) back to their places, to 

do this, match the ledges on the unit body with the 

grooves in the lower part of the plates (8, 9) and then 

lift the upper plate (8) and move down the lower plate 

(9) until the locks (5) clicking. Make sure that the 

plates (8, 9) are fixed.

• 

Do not use metal brushes, abrasives or solvents to 

clean the frying plates (8, 9) and the grill body.

• 

Do not immerse the grill, the power cord and the 

power plug into water or any other liquids.

STORAGE

• 

Before taking the grill away for storage, clean the 

frying plates (8, 9) and the grill body.

• 

Press together the lower (1) and the upper parts of 

the grill and set the lock (7) handle to the position  

«   ».

• 

You can store the folded press grill in vertical 

position.

• 

Keep the unit in a dry cool place out of reach of 

children and disabled persons.

DELIVERY SET

1.  Press grill — 1 pc.

2.  Frying plates — 2 pcs.

3.  Tray — 1 pcs.

4.  Manual — 1 pc.

TECHNICAL SPECIFICATIONS

• 

Power supply: 220-240 V, ~ 50-60 Hz

• 

Rated input power: 1850-2200 W

RECYCLING

To prevent possible damage to the 

environment or harm to the health of people 

by uncontrolled waste disposal, after service 

life expiration of the unit or the batteries (if 

included), do not discard them with usual 

household waste, deliver the unit and the batteries to 

specialized centers for further recycling.
The waste generated during the disposal of the unit 

is subject to mandatory collection and consequent 

disposal in the prescribed manner.
For further information about recycling of this product 

apply to a local municipal administration, a disposal 

service or to the shop where you purchased this 

product.

• 

Take the handle (4) and open the grill. 

• 

Carefully put the products on the lower frying plate 

(9), avoid burns by possible splashes of juice or fat 

dripping from the products.

• 

Take the handle (4) and lower the upper frying plate 

(8) on the products.

• 

Note:

 — depending on the thickness of the cooked 

products you can adjust the clearance between the 

frying plates (8, 9). To do this, move the lock (7) 

handle to the required position «I-II-II-IV-V».

•  After you finish cooking, take the handle (4) and lift 

the upper frying plate (8).

• 

Put the prepared products into an appropriate dish; 

use wooden or heat-resistant plastic kitchen tools to 

remove the products.

• 

To switch the grill off turn the operation move switch 

(12) and set it to the position «0», the light indicators 

(10, 11) will go out. Then unplug the unit.

USING THE GRILL AS A COOKING UNIT

•  You can use the grill as a flat frying surface. 

• 

Before connecting the power plug to the mains 

socket open the grill. To do this, take the handle (4) 

and lift the upper part of the grill.

• 

Press the button (6) «180°» and open the grill 

completely. 

• 

Insert the power plug into the mains socket.

• 

Turn the operation mode switch (12) knob and set the 

required operation mode «LOW-MeD-MAX».

• 

Wait until the frying plates (8, 9) heat up, the indicator 

(10) will go out.

• 

Carefully put the products on the frying plates (8, 

9), avoid burns by possible splashes of juice or fat 

dripping from the products.

• 

Put the prepared products into an appropriate dish; 

use wooden or heat-resistant plastic kitchen tools to 

remove the products.

• 

To switch the grill off set the operation mode switch 

(12) knob to the position «0», the light indicators (10, 

11) will go out. Then unplug the unit.

• 

Wait until the grill cools down completely, then lift the 

upper part of the grill, press the button (6) «180°» 

and fold the upper and the lower (1) parts together.

•  To fix the lower (1) and the upper parts of the grill set 

the lock (7) handle to the position «   ».

CLEANING AND CARE

• 

Clean the frying plates (8, 9) of the grill after every 

use.

• 

Switch the grill off by setting the operation mode 

switch (12) knob to the position «0», unplug it and 

wait until the press grill cools down completely.

• 

Clean the grill body surface with a slightly damp cloth 

and then wipe it dry.

• 

Take the handle (4) and open the grill.

• 

Remove the upper frying plate (8) by pressing on the 

lock (5) on the side.