Ryobi RY36LMX51A-150 36В 5133004646 - Инструкция по эксплуатации - Страница 8

6

| English

■

After each use, clean the product with a 

soft, dry cloth. Any part that is damaged 

should be properly repaired or replaced by 

an authorised service centre.

■

Check all nuts, bolts, and screws at frequent 

intervals for proper tightness to ensure the 

product is in safe working condition.

■

Be careful during adjustment of the product 

to prevent entrapment of the fingers 

between moving blades and fixed parts of 

the product.

■

When servicing the blades, be aware that 

even though the power source is turned off, 

the blades can still be moved.

■

The blade on the product is sharp. Use 

extreme caution, and wear heavy-duty 

gloves when fitting, replacing, cleaning, or 

checking bolt security.

■

Replace damaged blades and bolts in sets 

to preserve balance.

■

The blade bolts must be adequately 

tightened. See the manufacturer’s 

recommendations for blade bolt torque, 

which can be found in the product 

specification table in this manual.

CLEARING BLOCKAGES

■

Turn off the product, and remove the 

isolator key and the battery pack. Make 

sure that all moving parts have come to a 

complete stop.

■

Always wear heavy-duty gloves when 

checking or clearing a blockage. The 

blades are sharp and the blockage itself 

could be a sharp object.

■

Remove the grass catcher, check for and 

carefully clear obstructions.

■

Check the grass discharge chute, and 

carefully clear blockages.

■

Turn the product on its side. Check its 

underside and the area around the blade. If 

any blockages are found, remove carefully. 

Remember, the blade may move during 

cleaning.

RESIDUAL RISKS

Even when the product is used as prescribed, 

it is still impossible to completely eliminate 

certain residual risk factors. The following 

hazards may arise during use, and the 

operator should pay special attention to avoid 

the following: 

■

injury caused by vibration

–

Always use the right tool for the job. Use 

designated handles and restrict working 

time and exposure. 

■

injury caused by noise 

–

Exposure to noise can cause hearing 

injury. Wear ear protection and limit 

exposure.

■

injury from contact with the blades

■

injury caused by thrown objects

RISK REDUCTION

It has been reported that vibrations from 

handheld tools may contribute to a condition 

called Raynaud’s Syndrome. Symptoms may 

include tingling, numbness and blanching of 

the 

fi

 ngers, usually apparent upon exposure 

to cold. Hereditary factors, exposure to cold 

and dampness, diet, smoking and work 

practices are all thought to contribute to the 

development of these symptoms. There are 

measures that can be taken by the operator to 

possibly reduce the effects of vibration:

■

Keep your body warm in cold weather. 

When operating the product, wear gloves 

to keep the hands and wrists warm. It is 

reported that cold weather is a major factor 

contributing to Raynaud’s Syndrome.

■

After each period of operation, exercise to 

increase blood circulation.

■

Take frequent work breaks. Limit the 

amount of exposure per day. 

If you experience any of the symptoms of this 

condition, immediately discontinue use and 

see your physician.

 WARNING

Injuries may be caused, or aggravated, by 

prolonged use of a tool. When using any 

tool for prolonged periods, ensure you take 

regular breaks

KNOW YOUR PRODUCT

See page 219.

1. On/off 

bail

2. Self-propel 

paddle

3. Start 

button

4. Telescopic 

handle

5.  Handle lock lever

6. Grass 

catcher