Ryobi RY18LMH37A-250 5133004583 - Инструкция по эксплуатации - Страница 5

■

A battery pack must be recharged only with 

the charger specified by the manufacturer. 

Using a charger with an incompatible 

battery pack may create a risk of fire. Use 

battery pack only with charger listed.

■

Use only battery pack intended specifically 

for the product. Use of any other battery 

packs may result in a risk of fire, electric 

shock, or injury to persons.

■

When battery pack is not in use, keep it away 

from other metal objects like, paper clips, 

coins, keys, nails, screws, or other small 

metal objects, that can make a connection 

from one terminal to another. Shorting the 

battery pack terminals together may cause 

sparks, burns, fire or explosion.

■

Do not place battery products or their 

batteries near fire or heat. This increases 

the risk of explosion and possibly injury.

■

Do not open or mutilate the battery pack. 

Released electrolyte is corrosive and may 

cause damage to the eyes or skin. It may 

be toxic if swallowed. 

■

Protect the battery pack against moisture 

and water. Do not charge the product in a 

damp or wet location. Following this rule 

will reduce the risk of electric shock. 

■

In case of damage and improper use of the 

battery, vapour may be emitted. Provide 

for fresh air, and seek medical help in case 

of complaints. The vapour can irritate the 

respiratory system. 

■

Do not leave the battery pack inside a 

vehicle in hot or cold conditions.

■

Do not incinerate the battery.

■

Under abusive conditions, liquid may be 
ejected from the battery; avoid contact. 
If contact accidentally occurs, flush with 
water. If liquid contacts eyes, additionally 
seek medical help. Liquid ejected from the 
battery may cause irritation or burns.

LAWNMOWER SAFETY WARNINGS

■

Before use, always visually inspect to 
ensure that blades, blade bolts, and cutter 
assembly are not worn or damaged.

■

Replace worn or damaged blades and 
bolts in sets to preserve balance.

■

The blade on the product is sharp. Use 
extreme caution and wear heavy-duty 
gloves when fitting, replacing, cleaning or 
checking bolt security.

■

Bring the product to an authorised service 
centre to replace damaged or unreadable 
labels.

■

Check all nuts, bolts, and screws at 
frequent intervals for proper tightness to 
be sure that the product is in safe working 
condition.

■

Frequently check the grass catcher for 
wear, holes, or deterioration.

■

Replace worn or damaged parts before 
operating the product.

■

The product must be started with the user 
behind the handlebars in the operator 
safety zone. Never start the product if:

●

not all four wheels are on the ground

●

the grass discharge chute is exposed 

and is not protected by the grass catcher 

and grass discharge chute cover

●

hands and feet of all persons are not 

clear of the cutting enclosure

■

Never operate the product if the on/off 

switch on the handlebar does not properly 

start and stop the product.

■

Never attempt to lock the on/off switches in 

the on position; this is extremely dangerous.

■

Do not force the product. It will do the job 

better and safer at the speed for which it 

was designed. 

■

Stop the blade when crossing gravel 

surfaces. 

■

Do not pull the product backwards unless 

absolutely necessary. If you must back the 

product away from a wall or obstruction, 

first look down and behind to avoid tripping 

or pulling the product over your feet. 

■

Turn off the motor and allow the blade 

to stop if the product has to be tilted for 

transportation when crossing surfaces 

other than grass, and when transporting 

the product to and from the work area.

■

Never use the product with defective guards 

or shields, or without safety devices, such 

as deflectors  or grass collectors, in place.

3

 English 

|

EN

FR

DE

ES

IT

NL

PT

DA

SV

FI

NO

RU

PL

CS

HU

RO

LV

LT

ET

HR

SL

SK

BG

UK

TR