Makita PLM5113N2 - Инструкция по эксплуатации - Страница 14

14

11. STORAGE INSTRUCTIONS 

(OFF SEASON)

The following steps should be taken to prepare lawn 
mower for storage.
1. Empty the tank after the last mowing of the season.

a) Empty the petrol tank with a suction pump.

CAUTION:

 Do not drain the petrol in closed 

rooms, close proximity of open fire, etc. Do not smoke!
Petrol fumes can cause explosion or fire.

b) Start the engine and let it run until it has used up all 

remaining petrol and stalls.

c) Remove the spark plug. Use an oilcan to fill approx. 

20 ml oil into the combustion chamber. Operate the 
starter to evenly distribute the oil in the combustion 
chamber. Replace the spark plug.

2. Clean and grease the lawnmower carefully as 

described above under “LUBRICATION 
INSTRUCTIONS”.

3. Slightly grease the cutter to avoid corrosion.
4. Store the lawnmower in a dry, clean and frost-

protected place, out of reach of unauthorized persons.

CAUTION: 

The engine must have completely 

cooled down before storing the lawnmower.

NOTE:

- When storing any type of power equipment in an 

unventilated or material storage shed,

- Care should be taken to rust-proof the equipment. 

Using a light oil or silicone, coat the equipment, 
especially cables and all moving parts.

- Be careful not to bend or kink cables.
- If the starter rope becomes disconnected from rope 

guide on handle, disconnect and ground the spark plug 
wire. Depress the blade control handle and pull the 
starter rope out from engine slowly. Slip the starter rope 
into the rope guide bolt on handle.

Transport

Turn the engine off and allow the engine to cool down. 
Then disconnect the spark plug wire and empty the fuel 
tank according to the instructions in the engine manual. 
Ensure not to bend or damage the cutter when pushing 
the lawn mower over obstacles.