Husqvarna LC140 9676367-01 - Инструкция по эксплуатации - Страница 13

a) Make sure that the idle speed is correctly

adjusted.

b) Make sure that the fuel mixture is correct.
c) Make sure that the air filter is clean.

• If the spark plug is dirty, clean it and make sure that

the electrode gap is correct, refer to 

Technical data

on page 13.(Fig. 33 )

• Replace the spark plug if it is necessary.

To examine the fuel system

• Examine the fuel tank cap and the seal for the fuel

tank cap to make sure that there are no damages.

• Examine the fuel hose to make sure that there are

no leaks. If the fuel hose is damaged, let a service

agent replace it.

To adjust the clutch wire

If the drive feels slow, it is necessary to adjust the clutch

wire.

1. Attach the clutch wire in different holes on the drive

bail to adjust the length of the clutch wire. Decrease

the length of the clutch wire to increase the drive

speed. Extend the clutch wire to decrease the drive

speed.(Fig. 34 )

Note: 

If the drive is engaged when you do not pull

the drive bail, it is necessary to extend the clutch

wire.

2. For small adjustment of the drive speed, turn the

adjuster screw. To increase the drive speed, turn the

adjuster screw counterclockwise. To decrease the

drive speed, turn the adjustment screw clockwise.

(Fig. 35 )

If the drive feels slow also after the adjustment, let an

approved service agent replace the drive belt.

Transportation, storage and disposal

Transportation and storage

• For storage and transportation of the product and

fuel, make sure that there are no leaks or fumes.

Sparks or open flames, for example from electrical

devices or boilers, can start a fire.

• Always use approved containers for storage and

transportation of fuel.

• Empty the fuel tank before you put the product in

storage for a long period of time. Discard the fuel at

an applicable disposal location

• Safely attach the product during transportation to

prevent damage and accidents.

• Keep the product in a locked area to prevent access

for children or persons that are not approved.

• Keep the product in a dry and frost free area.

Disposal

• Obey the local recycling requirements and applicable

regulations.

• Discard all chemicals, such as engine oil or fuel, at a

service center or at an applicable disposal location.

• When the product is no longer in use, send it to a

Husqvarna dealer or discard it at a recycling

location.

Technical data

Technical data

LC 140

LC 140S

Engine

Brand

Briggs & Stratton

Briggs & Stratton

Displacement, cm

3

125

125

Speed, rpm

2900±100

2900±100

Nominal engine output, kW

1

1.8

1.8

1

The power rating of the engine indicated is the average net output (at specified rpm) of a typical production

engine for the engine model measured to SAE standard J1349/ISO1585. Mass production engines may differ

from this value. Actual power output for the engine installed on the final product will depend on the operating

speed, environmental conditions and other values.

801 - 003 - 04.10.2018

13