Газонокосилки AL-KO 4755 VS - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
GB
29
455 999_a
Wheel drive (optional)
Adjusting the Bowden cable
If the wheel drive can no longer be switched on or off
while the motor- is running, the related Bowden cable
needs to be adjusted.
Caution!
Adjust the Bowden cable only when the motor is
switched off.
1. Turn the adjuster on the Bowden cable in the
direction of the arrow (
27
).
2. To test the cable setting, switch on the motor and
switch on the wheel drive.
3. If the wheel drive is still not working, the lawnmower
must be taken to a service point or an authorised
specialist.
Changing the air filter
Follow the instructions of the manufacturer of the
motor.
Changing the spark plug
Follow the instructions of the manufacturer of the
motor.
Lubricating the drive pinion
From time to time, lubricate the drive pinion on the
transmission shaft
The wheel drive gearing is maintenance free.
Storage
Caution - risk of explosion!
Do not store the equipment where there are
naked flames or heat sources.
Allow the motor to cool down
To save storage space, fold the handlebar down
(
28
)
Store the equipment in an area which is kept dry,
and which cannot be accessed by children or
unauthorised persons
Store the starter battery where it will be protected
from frost
Recharge the starter battery from time to time
Drain the fuel tank
Pull out the spark plug connector
Repairs
Repairs should be carried out only by a service point or
an authorised specialist.
Disposal
Do not dispose of old equipment,
batteries or accumulators as household
waste!
Machine, packaging, and accessories were made
with recyclable materials, and should be disposed of
accordingly
.
Always have the equipment checked out by a pro-
fessional in the following cases:
after bumping against an obstacle
if the motor stops suddenly
if there is damage to the transmission
if the V-belt is faulty
if the blade is bent
if there is warping of the motor shaft
EC declaration of conformity
see assembly instructions
