Газонокосилки AL-KO 4755 VS - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
GB
25
455 999_a
Mulching with the mulch kit (optional)
When mulching, the grass cuttings are not collected, but
are left on the lawn. The grass mulch prevents the soil
from drying out, and supplies it with nutrients.
The best results are obtained by cutting back regularly
by about 2 cm. Only young grass with a soft leaf texture
decomposes quickly.
Grass height before mulching: 8 cm maximum
Grass height after mulching: 4 cm minimum
Adapt your walking pace to the mulching process,
do not walk too fast.
Inserting the mulch kit
Caution - Risk of injury!
Insert/remove the mulch kit only with the motor
switched off and when the mower blade has come
to a standstill.
1. Remove the grass catcher (
6
).
2.
Lift the deflector plate and insert the mulch kit in the
outlet shaft (
7
).
It must lock into place.
If the mulch kit is not locked into position, both the
mulch kit and the mower blade may be damaged.
Removing the mulch kit
1.
Lift the deflector plate.
2. Release the lock on the mulch kit (
8/1
).
3. Pull out the mulch kit (
8/2
).
Mowing with the side outlet duct (optional)
Caution - risk of injury!
Attach/detach the side outlet only when the motor
is switched off and the mower blade has come to
a standstill.
Inserting the side outlet
1. Remove the grass catcher and insert the mulch kit.
2. Fold up the side outlet cover and hold it (
9/1
).
3. Insert the side outlet duct (
9/2
).
4. Slowly close the cover.
The cover holds the side outlet duct and prevents
it falling out.
Removing the side outlet
1. Fold up the side outlet cover and hold it (
9/1
).
2. Remove the side outlet and close the cover
(
9/2
).
Setting the handle height (optional)
Clamp adjustment
1. Hold the bar and loosen both clamps (
10
).
2. Move the bar to the desired position
3. Lock the clamps.
