Газонокосилки AL-KO 4755 VS - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
GB
27
455 999_a
Blade coupling (optional)
With the blade coupling, the mower blade can be
engaged or disengaged while the motor is running.
Engaging the blade coupling
1. Pull in the safety brake handle on the handlebar
and hold it (
16
) - The brake handle does not
lock.
2. Push the coupling lever away from you (
14/1
)
- The blade coupling is engaged.
Disengaging the blade coupling.
3. Release the safety brake handle (
22
).
- The blade coupling is disengaged.
- The coupling lever moves to rest position (
14/2
).
Electrostart without primer/choke
(
13
)
1. Set the throttle lever to the "
START
" position
(
13/1
).
2. Pull in the safety brake handle on the handlebar and
hold it (
16
) – the brake handle does not lock.
3. Turn the ignition key fully to the right in the ignition
lock (
18
).
4. As soon as the motor starts running, release the
ignition key (it returns automatically to position "0").
5. According to the desired motor speed, set the
throttle lever to a position between
min
and
max
.
Turn the motor off
Lawnmower without blade coupling
1. Set the throttle lever to position
min
(
12/2
).
2. Release the safety brake handle (
22
).
- The motor is switched off.
Caution - danger of serious cut injuries!
The motor may continue running. After switching
off, make sure the motor has stopped turning.
Lawnmower with blade coupling
1. Release the safety brake handle (
25
).
2. Set the throttle lever to position
min
(
12/2
).
- The motor is switched off.
Caution - danger of serious cut injuries!
The motor may continue running. After switching
off, make sure the motor has stopped turning.
Wheel drive (optional)
(
20
)
Caution!
Engage the transmission only when the motor is
running.
Switching on the wheel drive
1. Press the transmission control handle against the
handlebar and hold it (
19
) – the transmission
control handle does not lock.
- The wheel drive is switched on.
Switching off the wheel drive
1. Release the transmission control handle (
21
).
- The wheel drive is switched off.
Vario transmission (Speed Control) (optional)
The Vario transmission allows continuous variation of the
ground speed of the lawnmower.
Caution!
Operate the lever only when the motor is running.
Operating the lever without the motor drive may
damage the drive mechanism.
To increase the speed, pull the lever (
20
)
towards (
20/2
)
To lower the speed, pull the lever (
20
) towards
(
20/1
)
Always adjust the ground speed to suit the current
ground and lawn conditions.
