Makita TW140DZ - Инструкция по эксплуатации - Страница 3

3

ENGLISH

SAFETY WARNINGS

General power tool safety warnings

WARNING:

Read all safety warnings, instruc-

tions, illustrations and specifications provided 

with this power tool.

 Failure to follow all instructions 

listed below may result in electric shock, fire and/or 

serious injury.

Save all warnings and instruc-
tions for future reference.

The term "power tool" in the warnings refers to your 

mains-operated (corded) power tool or battery-operated 

(cordless) power tool.

Work area safety

1. 

Keep work area clean and well lit.

 Cluttered or 

dark areas invite accidents.

2. 

Do not operate power tools in explosive atmo-

spheres, such as in the presence of flammable 

liquids, gases or dust.

 Power tools create sparks 

which may ignite the dust or fumes.

3. 

Keep children and bystanders away while 
operating a power tool.

 Distractions can cause 

you to lose control.

Electrical Safety

1. 

Power tool plugs must match the outlet. Never 
modify the plug in any way. Do not use any 
adapter plugs with earthed (grounded) power 
tools. 

Unmodified plugs and matching outlets will 

reduce risk of electric shock.

2. 

Avoid body contact with earthed or grounded 
surfaces, such as pipes, radiators, ranges and 
refrigerators.

 There is an increased risk of elec-

tric shock if your body is earthed or grounded.

3. 

Do not expose power tools to rain or wet con-
ditions.

 Water entering a power tool will increase 

the risk of electric shock.

4. 

Do not abuse the cord. Never use the cord for 
carrying, pulling or unplugging the power tool. 
Keep cord away from heat, oil, sharp edges 
or moving parts.

 Damaged or entangled cords 

increase the risk of electric shock.

5. 

When operating a power tool outdoors, use an 
extension cord suitable for outdoor use.

 Use of 

a cord suitable for outdoor use reduces the risk of 
electric shock.

6. 

If operating a power tool in a damp location 
is unavoidable, use a residual current device 
(RCD) protected supply.

 Use of an RCD reduces 

the risk of electric shock.

7. 

Power tools can produce electromagnetic fields 

(EMF) that are not harmful to the user.

 However, 

users of pacemakers and other similar medical 
devices should contact the maker of their device and/
or doctor for advice before operating this power tool.

Personal Safety

1. 

Stay alert, watch what you are doing and use 
common sense when operating a power tool. 
Do not use a power tool while you are tired 

or under the influence of drugs, alcohol or 

medication.

 A moment of inattention while oper-

ating power tools may result in serious personal 

injury.

2. 

Use personal protective equipment. Always 
wear eye protection.

 Protective equipment such 

as a dust mask, non-skid safety shoes, hard hat or 

hearing protection used for appropriate conditions 

will reduce personal injuries.

3. 

Prevent unintentional starting. Ensure the 
switch is in the off-position before connecting 
to power source and/or battery pack, picking 
up or carrying the tool.

 Carrying power tools with 

your finger on the switch or energising power tools 

that have the switch on invites accidents.

4. 

Remove any adjusting key or wrench before 
turning the power tool on.

 A wrench or a key left 

attached to a rotating part of the power tool may 

result in personal injury.

5. 

Do not overreach. Keep proper footing and 
balance at all times.

 This enables better control 

of the power tool in unexpected situations.

6. 

Dress properly. Do not wear loose clothing or 
jewellery. Keep your hair and clothing away 
from moving parts.

 Loose clothes, jewellery or 

long hair can be caught in moving parts.

7. 

If devices are provided for the connection of 
dust extraction and collection facilities, ensure 
these are connected and properly used.

 Use of 

dust collection can reduce dust-related hazards.

8. 

Do not let familiarity gained from frequent use 
of tools allow you to become complacent and 
ignore tool safety principles.

 A careless action 

can cause severe injury within a fraction of a 

second.

9. 

Always wear protective goggles to protect 
your eyes from injury when using power tools.
The goggles must comply with ANSI Z87.1 in 
the USA, EN 166 in Europe, or AS/NZS 1336 
in Australia/New Zealand. In Australia/New 
Zealand, it is legally required to wear a face 
shield to protect your face, too.

It is an employer's responsibility to enforce 
the use of appropriate safety protective equip-
ments by the tool operators and by other per-
sons in the immediate working area.

Power tool use and care

1. 

Do not force the power tool. Use the correct 
power tool for your application.

 The correct 

power tool will do the job better and safer at the 

rate for which it was designed.