Makita DTW180Z - Инструкция по эксплуатации - Страница 5

5 ENGLISH

WARNING:

The vibration emission during actual 

use of the power tool can differ from the declared val-

ue(s) depending on the ways in which the tool is used 

especially what kind of workpiece is processed.

WARNING:

Be sure to identify safety measures 

to protect the operator that are based on an estimation 

of exposure in the actual conditions of use (taking 

account of all parts of the operating cycle such as the 

times when the tool is switched off and when it is run-

ning idle in addition to the trigger time).

EC Declaration of Conformity

For European countries only

The EC declaration of conformity is included as Annex A 

to this instruction manual.

SAFETY WARNINGS

General power tool safety warnings

WARNING:

Read all safety warnings, instruc-

tions, illustrations and specifications provided with this 

power tool.

 Failure to follow all instructions listed below 

may result in electric shock, fire and/or serious injury.

Save all warnings and instruc-

tions for future reference.

The term "power tool" in the warnings refers to your 

mains-operated (corded) power tool or battery-operated 

(cordless) power tool.

Cordless impact wrench safety 

warnings

1. 

Hold the power tool by insulated gripping 

surfaces, when performing an operation 

where the fastener may contact hidden wiring.

Fasteners contacting a "live" wire may make 

exposed metal parts of the power tool "live" and 

could give the operator an electric shock.

2. 

Wear ear protectors.

3. 

Check the impact socket carefully for wear, 

cracks or damage before installation.

4. 

Hold the tool firmly.

5. 

Keep hands away from rotating parts.

6. 

Always be sure you have a firm footing.

Be sure no one is below when using the tool in 

high locations.

7. 

The proper fastening torque may differ 

depending upon the kind or size of the bolt. 

Check the torque with a torque wrench.

SAVE THESE INSTRUCTIONS.

WARNING:

DO NOT let comfort or familiarity 

with product (gained from repeated use) replace strict 

adherence to safety rules for the subject product.
MISUSE or failure to follow the safety rules stated in this 

instruction manual may cause serious personal injury.

Important safety instructions for 

battery cartridge

1. 

Before using battery cartridge, read all instructions 

and cautionary markings on (1) battery charger, (2) 

battery, and (3) product using battery.

2. 

Do not disassemble battery cartridge.

3. 

If operating time has become excessively 

shorter, stop operating immediately. It may 

result in a risk of overheating, possible burns 

and even an explosion.

4. 

If electrolyte gets into your eyes, rinse them out 

with clear water and seek medical attention right 

away. It may result in loss of your eyesight.

5. 

Do not short the battery cartridge:

(1) 

Do not touch the terminals with any con-

ductive material.

(2) 

Avoid storing battery cartridge in a con-

tainer with other metal objects such as 

nails, coins, etc.

(3) 

Do not expose battery cartridge to water 

or rain.

A battery short can cause a large current 

flow, overheating, possible burns and even a 

breakdown.

6. 

Do not store the tool and battery cartridge in 

locations where the temperature may reach or 

exceed 50 °C (122 °F).

7. 

Do not incinerate the battery cartridge even if 

it is severely damaged or is completely worn 

out. The battery cartridge can explode in a fire.

8. 

Be careful not to drop or strike battery.

9. 

Do not use a damaged battery.

10. 

The contained lithium-ion batteries are subject to 

the Dangerous Goods Legislation requirements. 

For commercial transports e.g. by third parties, 

forwarding agents, special requirement on pack-

aging and labeling must be observed. 

For preparation of the item being shipped, consult-

ing an expert for hazardous material is required. 

Please also observe possibly more detailed 

national regulations. 

Tape or mask off open contacts and pack up the 

battery in such a manner that it cannot move 

around in the packaging.

11. 

When disposing the battery cartridge, remove 

it from the tool and dispose of it in a safe 

place. Follow your local regulations relating to 

disposal of battery.

12. 

Use the batteries only with the products 

specified by Makita.

 Installing the batteries to 

non-compliant products may result in a fire, exces

-

sive heat, explosion, or leak of electrolyte.

13. 

If the tool is not used for a long period of time, 

the battery must be removed from the tool.

SAVE THESE INSTRUCTIONS.

CAUTION:

Only use genuine Makita batteries.

Use of non-genuine Makita batteries, or batteries that 

have been altered, may result in the battery bursting 

causing fires, personal injury and damage. It will 

also void the Makita warranty for the Makita tool and 

charger.