Einhell CC-IW 450 (2048304) - Инструкция по эксплуатации - Страница 16

GB

- 16 -

L

pA

 sound pressure level  ........................ 89 dB(A)

K

pA

 uncertainty  ............................................. 3 dB

L

WA

 sound power level   ........................ 100 dB(A)

K

WA

 uncertainty ............................................. 3 dB

Wear ear-mu

ff

 s.

The impact of noise can cause damage to hea-

ring.

Total vibration values (vector sum of three direc-

tions) determined in accordance with EN 60745.

Tightening screws and nuts of maximum per-

mitted size

Vibration emission value a

h

 = 10.04 m/s

2

K uncertainty = 1.5 m/s

2

The speci

fi

 ed vibration value was established in 

accordance with a standardized testing method. It 

may change according to how the electric equip-

ment is used and may exceed the speci

fi

 ed value 

in exceptional circumstances.

The speci

fi

 ed vibration value can be used to 

compare the equipment with other electric power 

tools.

The speci

fi

 ed vibration value can be used for initi-

al assessment of a harmful e

ff

 ect.

Keep the noise emissions and vibrations to a 

minimum.

• 

 Only use appliances which are in perfect wor-

king order.

• 

 Service and clean the appliance regularly.

• 

 Adapt your working style to suit the appliance.

• 

 Do not overload the appliance.

• 

 Have the appliance serviced whenever ne-

cessary.

• 

 Switch the appliance off when it is not in use.

• 

 Wear protective gloves.

Caution!

Residual risks

Even if you use this electric power tool in 

accordance with instructions, certain resi-

dual risks cannot be rules out. The following 

hazards may arise in connection with the 

equipment’s construction and layout:

1.   Lung damage if no suitable protective dust 

mask is used.

2.   Damage to hearing if no suitable ear protec-

tion is used.

3.   Health damage caused by hand-arm vib-

rations if the equipment is used over a pro-

longed period or is not properly guided and 

maintained.

5.  Before starting the equipment

Before you connect the equipment to the mains 

supply make sure that the data on the rating plate 

are identical to the mains data.

Warning! 

Always pull the power plug before making 

adjustments to the equipment.

Bit insertion/removal (Fig. 2/Item 1)

Push a drive socket insert onto the square drive 

mount (1).

To remove it, pull the drive socket insert o

ff

  of the 

square drive mount (1).

6. Operation

Danger!

To avoid danger, the machine must only be held 

using the two handles (2). 

6.1 Clockwise/Counter-clockwise selector 

switch (Fig. 3/Item 3)

You can select clockwise or counter-clockwise 

rotation using the rocker switch (3).

R 

→

 loosen screws / nuts (counter-clockwise)

F 

→

 tighten screws / nuts (clockwise)

Important!

To avoid gear damage, make sure that the tool 

has come to a complete stop before you change 

the direction of rotation.

6.2 Working with the impact driver

Loosening:

• 

Mount a drive socket insert on the impact dri-

ver (see Paragraph 5).

• 

Place the impact driver on the screw/nut and 

loosen the screw/nut by pressing the “R” end 

of the rocker switch (3).

• 

If the screws/nuts are very tight or if they are 

rusted, use a tire wrench or torque wrench to 

slightly loosen them.

Tightening:

• 

Caution! Only use the impact driver for loo-

Anl_CC_IW_450_SPK9.indb   16

Anl_CC_IW_450_SPK9.indb   16

22.03.2018   13:28:09

22.03.2018   13:28:09