Einhell CC-IW 450 (2048304) - Инструкция по эксплуатации - Страница 15

GB

- 15 -

Danger!

 When using the equipment, a few safety pre-

cautions must be observed to avoid injuries and 

damage. Please read the complete operating 

instructions and safety regulations with due care. 

Keep this manual in a safe place, so that the in-

formation is available at all times. If you give the 

equipment to any other person, hand over these 

operating instructions and safety regulations as 

well. We cannot accept any liability for damage 

or accidents which arise due to a failure to follow 

these instructions and the safety instructions.

1. Safety regulations

The corresponding safety information can be 

found in the enclosed booklet.

Danger!

Read all safety regulations and instructions.

Any errors made in following the safety regula-

tions and instructions may result in an electric 

shock, 

fi

 re and/or serious injury.

Keep all safety regulations and instructions 

in a safe place for future use.

2.  Layout and items supplied

2.1 Layout (Fig. 1)

1.  ½“external square drive mount

2. Handle

3.  Rocker switch (selector switch for forward/

reverse; ON/OFF switch)

2.2 Items supplied

Please check that the article is complete as 

speci

fi

 ed in the scope of delivery. If parts are 

missing, please contact our service center or the 

sales outlet where you made your purchase at 

the latest within 5 working days after purchasing 

the product and upon presentation of a valid bill 

of purchase. Also, refer to the warranty table in 

the service information at the end of the operating 

instructions.

• 

 Open the packaging and take out the equip-

ment with care.

• 

 Remove the packaging material and any 

packaging and/or transportation braces (if 

available).

• 

 Check to see if all items are supplied.

• 

 Inspect the equipment and accessories for 

transport damage.

• 

 If possible, please keep the packaging until 

the end of the guarantee period.

Danger!

The equipment and packaging material are 

not toys. Do not let children play with plastic 

bags, foils or small parts. There is a danger of 

swallowing or su

ff

 ocating!

• 

Electric impact driver

• 

Socket wrench bit (4x)

• 

Original operating instructions

• 

 Safety  instructions 

3. Proper use

This tool is intended to be used primarily for loo-

sening and tightening screws and nuts (e.g. for 

automotive work).

The equipment is to be used only for its prescri-

bed purpose. Any other use is deemed to be a 

case of misuse. The user / operator and not the 

manufacturer will be liable for any damage or inju-

ries of any kind caused as a result of this.

Please note that our equipment has not been de-

signed for use in commercial, trade or industrial 

applications. Our warranty will be voided if the 

machine is used in commercial, trade or industrial 

businesses or for equivalent purposes.

4. Technical data

Rated voltage:  ........................ 230-240 V ~ 50 Hz
Power consumption:  .................................  450 W
Idling speed: ........................................ 2600 min

-1

Blow rate:  ............................................ 5000 min

-1

Torque:  .................................................... 300 Nm
Tool chuck:  ......................................  ½“(12.7mm)
Protection class:  ............................................ II/

Weight:  .......................................................2.3 kg

Danger!

Sound and vibration

Sound and vibration values were measured in 

accordance with EN 60745.

Anl_CC_IW_450_SPK9.indb   15

Anl_CC_IW_450_SPK9.indb   15

22.03.2018   13:28:09

22.03.2018   13:28:09