STATUS CP 115 07410601 - Инструкция по эксплуатации - Страница 11

11

EN

GENERAL INSPECTION

Regularly inspect all fasteners and ensure they are properly tightened. Should any of the 

screws be loose, retighten it immediately to avoid hazards.

If the replacement of the supply cord is necessary, this has to be done by the manufacturer 

or his agent in order to avoid a safety hazard.

CLEANING

For safe operation always keep the machine and its ventilation slots clean.

Regularly check to see if any dust or foreign matter has entered the ventilation slots and the 

grills around the switches. Use a soft brush and/or air jet to remove any accumulated dust. 

Wear safety glasses to protect your eyes whilst cleaning. 

Exterior plastic parts may be cleaned with a damp cloth and mild detergent if necessary.

 WARNING!

Never use alcohol, petrol or other cleaning agent. Never use caustic agents to   

clean plastic parts. Water must never come into contact with the tool.

REPLACEMENT PARTS

To assure product safety and reliability, repairs, maintenance and adjustment (including 

brush inspection and replacement) should be performed by authorised service centres 

always using genuine replacement parts.

STORAGE

• 

When storing the machine in its original packaging the oil tank must be completely 

emptied.

• 

To prevent leakage lay the machine down horizontally (with the oil tank cap facing 

upwards).

• 

Clean the machine with a soft brush or dry cloth without using solvent.

• 

Store in a secure, dry place out of the reach of children.

• 

When storing the machine for long periods remove the guide bar and the chain and 

store them well lubricated.

MAINTENANCE