Makita LXT DUC356Z - Инструкция по эксплуатации - Страница 9

9 ENGLISH

NOTE:

 The declared noise emission value(s) has been 

measured in accordance with a standard test method and 

may be used for comparing one tool with another.

NOTE:

 The declared noise emission value(s) may also be 

used in a preliminary assessment of exposure.

WARNING:

Wear ear protection.

WARNING:

The noise emission during actual 

use of the power tool can differ from the declared 

value(s) depending on the ways in which the 

tool is used especially what kind of workpiece is 

processed.

WARNING:

Be sure to identify safety mea-

sures to protect the operator that are based on an 

estimation of exposure in the actual conditions of 

use (taking account of all parts of the operating 

cycle such as the times when the tool is switched 

off and when it is running idle in addition to the 

trigger time).

Vibration

The vibration total value (tri-axial vector sum) deter-

mined according to EN ISO 11681-2:

Model DUC256

Work mode: cutting wood

Vibration emission (a

h,W

) : 3.2 m/s

2

Uncertainty (K) : 1.5 m/s

2

Model DUC306

Work mode: cutting wood

Vibration emission (a

h,W

) : 3.2 m/s

2

Uncertainty (K) : 1.5 m/s

2

Model DUC356

Work mode: cutting wood

Vibration emission (a

h,W

) : 3.2 m/s

2

Uncertainty (K) : 1.5 m/s

2

Model DUC406

Work mode: cutting wood

Vibration emission (a

h,W

) : 3.2 m/s

2

Uncertainty (K) : 1.5 m/s

2

Model DUC256C

Work mode: cutting wood

Vibration emission (a

h,W

) : 2.5 m/s

2

 or less

Uncertainty (K) : 1.5 m/s

2

NOTE:

 The declared vibration total value(s) has been 

measured in accordance with a standard test method 

and may be used for comparing one tool with another.

NOTE:

 The declared vibration total value(s) may also 

be used in a preliminary assessment of exposure.

WARNING:

The vibration emission during 

actual use of the power tool can differ from the 

declared value(s) depending on the ways in which 

the tool is used especially what kind of workpiece 

is processed.

WARNING:

Be sure to identify safety mea-

sures to protect the operator that are based on an 

estimation of exposure in the actual conditions of 

use (taking account of all parts of the operating 

cycle such as the times when the tool is switched 

off and when it is running idle in addition to the 

trigger time).

EC Declaration of Conformity

For European countries only

The EC declaration of conformity is included as Annex A 

to this instruction manual.

SAFETY WARNINGS

General power tool safety warnings

WARNING:

Read all safety warnings, instruc-

tions, illustrations and specifications provided 

with this power tool.

 Failure to follow all instructions 

listed below may result in electric shock, fire and/or 

serious injury.

Save all warnings and instruc-

tions for future reference.

The term "power tool" in the warnings refers to your 

mains-operated (corded) power tool or battery-operated 

(cordless) power tool.

Cordless Chain saw safety warnings

1. 

Keep all parts of the body away from the saw 

chain when the chain saw is operating. Before 

you start the chain saw, make sure the saw 

chain is not contacting anything.

 A moment of 

inattention while operating chain saws may cause 

entanglement of your clothing or body with the 

saw chain.

2. 

Always hold the chain saw with your right 

hand on the top handle and your left hand on 

the front handle.

 Holding the chain saw with a 

reversed hand configuration increases the risk of 

personal injury and should never be done.

3. 

Hold the power tool by insulated gripping surfaces 

only, because the saw chain may contact hidden 

wiring.

 Saw chains contacting a "live" wire may make 

exposed metal parts of the power tool "live" and could 

give the operator an electric shock.

4. 

Wear safety glasses and hearing protection.

Further protective equipment for head, hands, 

legs and feet is recommended. Adequate protec-

tive clothing will reduce personal injury by flying 

debris or accidental contact with the saw chain.

5. 

Always keep proper footing.

6. 

When cutting a limb that is under tension be alert 

for spring back.

 When the tension in the wood fibres is 

released the spring loaded limb may strike the operator 

and/or throw the chain saw out of control.

7. 

Use extreme caution when cutting brush and 

saplings.

 The slender material may catch the saw 

chain and be whipped toward you or pull you off 

balance.

8. 

Carry the chain saw by the front handle with 

the chain saw switched off and away from your 

body. When transporting or storing the chain 

saw always fit the guide bar cover.

 Proper 

handling of the chain saw will reduce the likelihood 

of accidental contact with the moving saw chain.