Makita LXT DUC302RF2 - Инструкция по эксплуатации - Страница 9

9 ENGLISH

20. 

Store idle power tools out of the reach of chil-

dren and do not allow persons unfamiliar with 

the power tool or these instructions to operate 

the power tool.

 Power tools are dangerous in the 

hands of untrained users.

21. 

Maintain power tools. Check for misalignment 

or binding of moving parts, breakage of parts 

and any other condition that may affect the 

power tool’s operation. If damaged, have the 

power tool repaired before use.

 Many accidents 

are caused by poorly maintained power tools.

22. 

Keep cutting tools sharp and clean.

 Properly 

maintained cutting tools with sharp cutting edges 

are less likely to bind and are easier to control.

23. 

Use the power tool, accessories and tool bits 

etc. in accordance with these instructions, tak-

ing into account the working conditions and 

the work to be performed.

 Use of the power tool 

for operations different from those intended could 

result in a hazardous situation.

Battery tool use and care

24. 

Recharge only with the charger specified by 

the manufacturer.

 A charger that is suitable for 

one type of battery pack may create a risk of fire 

when used with another battery pack.

25. 

Use power tools only with specifically desig

-

nated battery packs.

 Use of any other battery 

packs may create a risk of injury and fire.

26. 

When battery pack is not in use, keep it away 

from other metal objects, like paper clips, 

coins, keys, nails, screws or other small metal 

objects, that can make a connection from one 

terminal to another.

 Shorting the battery termi-

nals together may cause burns or a fire.

27. 

Under abusive conditions, liquid may be 

ejected from the battery; avoid contact. If con-

tact accidentally occurs, flush with water. If 

liquid contacts eyes, additionally seek medical 

help.

 Liquid ejected from the battery may cause 

irritation or burns.

Service

28. 

Have your power tool serviced by a qualified 

repair person using only identical replacement 

parts.

 This will ensure that the safety of the power 

tool is maintained.

29. 

Follow instruction for lubricating and chang-

ing accessories.

30. 

Keep handles dry, clean and free from oil and 

grease.

Cordless Chain saw safety warnings:

1. 

Keep all parts of the body away from the saw 

chain when the chain saw is operating. Before 

you start the chain saw, make sure the saw 

chain is not contacting anything.

 A moment of 

inattention while operating chain saws may cause 

entanglement of your clothing or body with the 

saw chain. 

2. 

When holding with both hands, always hold 

the chain saw with your right hand on the rear 

handle and your left hand on the front handle.

Holding the chain saw with a reversed hand con-

figuration increases the risk of personal injury and 

should never be done.

3. 

Hold the power tool by insulated gripping 

surfaces only, because the saw chain may con-

tact hidden wiring.

 Saw chains contacting a "live" 

wire may make exposed metal parts of the power 

tool "live" and could give the operator an electric 

shock.

4. 

Wear safety glasses and hearing protection. 

Further protective equipment for head, hands, 

legs and feet is recommended.

 Adequate pro-

tective clothing will reduce personal injury by flying 

debris or accidental contact with the saw chain.

5. 

Always keep proper footing.

 Slippery or unsta-

ble surfaces may cause a loss of balance or con-

trol of the chain saw.

6. 

When cutting a limb that is under tension be 

alert for spring back.

 When the tension in the 

wood fibers is released the spring loaded limb may 

strike the operator and/or throw the chain saw out 

of control.

7. 

Use extreme caution when cutting brush and 

saplings.

 The slender material may catch the saw 

chain and be whipped toward you or pull you off 

balance.

8. 

Carry the chain saw by the front handle with 

the chain saw switched off and away from your 

body. When transporting or storing the chain 

saw always fit the guide bar cover.

 Proper 

handling of the chain saw will reduce the likelihood 

of accidental contact with the moving saw chain. 

9. 

Follow instructions for lubricating, chain ten-

sioning and changing accessories.

 Improperly 

tensioned or lubricated chain may either break or 

increase the chance for kickback.

10. 

Keep handles dry, clean, and free from oil and 

grease.

 Greasy, oily handles are slippery causing 

loss of control.

11. 

Cut wood only. Do not use chain saw for pur-

poses not intended. For example: do not use 

chain saw for cutting plastic, masonry or non-

wood building materials.

 Use of the chain saw 

for operations different than intended could result 

in a hazardous situation.

12. 

Causes and operator prevention of kickback:

Kickback may occur when the nose or tip of the 

guide bar touches an object, or when the wood 

closes in and pinches the saw chain in the cut.

Tip contact in some cases may cause a sudden 

reverse reaction, kicking the guide bar up and 

back towards the operator.

Pinching the saw chain along the top of the guide 

bar may push the guide bar rapidly back towards 

the operator.

Either of these reactions may cause you to lose 

control of the saw which could result in serious 

personal injury. Do not rely exclusively upon the 

safety devices built into your saw. As a chain saw 

user, you should take several steps to keep your 

cutting jobs free from accident or injury.

Kickback is the result of tool misuse and/or incor-

rect operating procedures or conditions and can 

be avoided by taking proper precautions as given 

below: