Электропилы Makita LXT DUC302RF2 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
7 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model
DUC252
DUC302
Standard guide bar
Guide bar length
250 mm
300 mm
Cutting length
23 cm
24 cm
28 cm
Type
Sprocket nose bar
Carving bar
Sprocket nose bar
Standard saw chain
Type
91PX
25AP
90PX
Pitch
9.5 mm (3/8") 6.35 mm (1/4")
9.5 mm (3/8")
Gauge
1.3 mm (0.05") 1.3 mm (0.05")
1.1 mm (0.043")
No. of drive links
40
60
46
Sprocket
Number of teeth
6
9
6
Pitch
9.5 mm (3/8") 6.35 mm (1/4")
9.5 mm (3/8")
Overall length (without guide bar)
316 mm
Net weight
*1
4.1 kg
*2
4.6 kg
4.7 kg
Chain speed per minute
8.3 m/s (500 m/min)
Chain oil tank volume
85 cm
3
Rated voltage
D.C. 36 V
D.C. 36 V
• Due to our continuing program of research and development, the specifications herein are subject to change with
-
out notice.
• Specifications and battery cartridge may differ from country to country.
*1 Weight, with largest battery cartridge, without guide bar and chain, empty oil tank, according to EN ISO 11681-2.
*2 Weight, with battery cartridge, guide bar, and chain, filled oil tank, according to EPTA-Procedure 01/2003.
WARNING: Use appropriate combination of the guide bar and saw chain. Otherwise personal injury may result.
Symbols
The following show the symbols used for the equip-
ment. Be sure that you understand their meaning before
use.
Read instruction manual.
Wear eye protection.
Wear ear protection.
Wear a helmet, goggles and ear protection.
Use appropriate protection for foot-leg and
hand-arm.
This saw is to be used by properly trained
operators only.
Do not expose to rain.
Maximum permissible cut length
Direction of chain travel
Saw chain oil adjustment
Ni-MH
Li-ion
Only for EU countries
Do not dispose of electric equipment or
battery pack together with household waste
material!
In observance of the European Directives,
on Waste Electric and Electronic
Equipment and Batteries and Accumulators
and Waste Batteries and Accumulators
and their implementation in accordance
with national laws, electric equipment and
batteries and battery pack(s) that have
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.
Intended use
The tool is intended for cutting branches / pruning trees.
It is also suitable for tree service.
Noise
The typical A-weighted noise level determined accord-
ing to EN60745-2-13:
Sound pressure level (L
pA
) : 84.4 dB (A)
Sound power level (L
WA
) : 95.4 dB (A)
Uncertainty (K) : 2.5 dB (A)
Wear ear protection
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN60745-2-13:
Model DUC252
Work mode : cutting wood
Vibration emission (a
h
) : 4.7 m/s
2
Uncertainty (K) : 1.5 m/s
2
