Электропилы AL-KO HT 600 FLEXIBLE CUT - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
19
470519_b
HT 600, HT 700
GB
Warranty
We will eliminate any material defects or manufacturing defects in the machine during the statutory period of limita-
tion for warranty claims; at our discretion, this will be effected either by repair or replacement. The period of limita-
tion is determined in accordance with the laws of the country in which the machine was purchased.
Fulfi lment of our warranty obligations is conditional on:
The warranty is nullifi ed in the following cases:
Correct use of the machine
Observation of the operating instructions
Use of original spare parts
Attempted repairs to the machine
Technical modi
fi
cations to the machine
Incorrect use
(e.g. commercial or municipal use)
The following are not covered by the warranty:
Damage to paintwork attributable to normal wear
Wearing parts indicated by
XXX XXX (X) on the spare parts card
Internal combustion engines – These are covered by the separate warranty provisions of the relevant
engine manufacturer
In the event of a warranty claim, please contact your dealer or local authorised customer service centre with this
warranty declaration and proof of purchase. The statutory rights of the purchaser with respect to claims against the
vendor in the case of defects are not affected by this warranty declaration.
EC Declaration of Conformity
We hereby declare that this product, in the form marketed by us, meets the requirements of the harmonised
EU directives, the EU safety standards and the product-speci
fi
c standards.
Product
Electric hedge trimmer
Serial number
G 2402405
Manufacturer
AL-KO Geräte GmbH
Ichenhauser Str. 14
D-89359 Kötz
Authorised representative
Anton Eberle
Ichenhauser Str. 14
D-89359 Kötz
Type
HT 600 Flexible Cut
HT 700 Flexible Cut
EU directives
98/37/EC (until
28.12.09)
2006/42/EC (from
29.12.09)
2006/95/EC
2004/108/EC
2000/14/EC
Harmonised standards
EN 60745-2-15
Sound power level
measured / guaranteed
HT 600 Flexible Cut 107 / 107 dB(A)
HT 700 Flexible Cut 103 / 103 dB(A)
Conformity assessment
2000/14/EC, Annex V
Kötz, 20.10.2009
Antonio De Filippo, Managing Director
