Электропилы AL-KO HT 600 FLEXIBLE CUT - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Translation of original user instructions
18
AL-KO Hedge trimmer
Troubleshooting
Fault
Possible cause
Solution
Machine does not work
No power supply
Check fuse / extension lead
Machine cable defective
Contact AL-KO Service Centre
Machine cuts out intermit-
tently
Extension lead damaged
Check extension lead
ON/OFF switch defective
Contact AL-KO Service Centre
Internal fault
Contact AL-KO Service Centre
Motor runs but blades do
not move
Internal fault
Contact AL-KO Service Centre
Blades get hot
Insuf
fi
cient lubrication
Lightly oil blades
Blades blunt
Contact AL-KO Service Centre
Notching on blades
Contact AL-KO Service Centre
In the case of faults that are not listed in this table, or faults that you cannot rectify without assistance, please
contact our customer service department.
Storage
The blade cover can be used as a wall-mount-
ed holder for the hedge trimmer.
Make sure that the screws are tightened
securely! (
7
)
Always unplug the machine from the mains for
storage.
Always attach the blade cover before storing
the machine.
Store the machine in a dry condition and out of
reach of children and unauthorised persons.
Secure the machine with a padlock* (
6
).
* Not supplied
Disposal
Machines, batteries and rechargeable
batteries that are no longer required
must not be disposed of with household
waste!
Packaging, machine and accessories are manufac-
tured using recyclable materials and must be disposed
of accordingly.
Maintenance and care
Danger of electrocution!
Always unplug from the mains before com-
mencing any maintenance or preventive
maintenance work!
Danger – risk of injury!
Always wear protective gloves when carrying
out maintenance or preventive maintenance
work on the blade!
Always clean the blade and housing with a
1.
brush or cloth after use. Do not use water
and/or aggressive cleaning agents – risk of
corrosion!
Lightly oil the cutter bar with a suitable pre-
2.
servative oil.
Check that all screws are tightened securely.
3.
Check blade regularly.
4.
Contact AL-KO Service Centre in the case of:
defective blade
blunt blade
excessive wear
