Philips SC2001/01 - Инструкция по эксплуатации - Страница 25

Problem

Possible cause

Solution

I have switched on the 

appliance but I cannot 

increase or decrease the 

light intensity.

The appliance has  

to be reset.

To reset the appliance, switch off the appliance and 

then switch it on again. If you still cannot adjust the 

light intensity, contact the Consumer Care Centre in 

your countr y, your Philips dealer or a Philips ser vice 

centre.

The ‘ready to flash’ light 

does not go on when I 

place the appliance on 

the skin.

You have not put 

the attachment 

with safety ring 

properly on the 

skin.

Place the appliance in a 90° angle onto the skin in such 

a way that all contact switches touch the skin. Then 

check if the ‘ready to flash’ light is on and press the 

flash button.

If this does not work, place the appliance on a par t 

of your body where it is easy to establish full skin 

contact, for example on your lower arm.Then check 

if the ‘ready to flash’ light works. If the ‘ready to flash’ 

light still does not go on when you place the appliance 

on the skin, contact the Consumer Care Centre in 

your countr y, your Philips dealer or a Philips ser vice 

centre.

The safety ring is 

dir ty.

Clean the safety ring carefully. If you are unable to clean 

the safety ring properly, contact the Consumer Care 

Centre in your countr y, your Philips dealer or a Philips 

ser vice centre to replace the attachment.

The ‘ready to flash’ light 

does not go on when I 

place the attachment on 

my skin, but the cooling 

fan works.

The overheat 

protection has 

been activated.

When the overheat protection has been activated, 

the fan still works. Do not switch off the appliance 

and let it cool down for approx. 15 minutes before 

you continue to use it. If the ‘ready to flash’ light still 

does not go on when you place the appliance on 

the skin, contact the Consumer Care Centre in your 

countr y, your Philips dealer or a Philips ser vice centre.

The ‘ready to flash’ light is 

green but the appliance 

does not produce a flash 

when I press the flash 

button.

The appliance 

needs to be reset.

To reset the appliance, switch off the appliance and 

switch it on again. If the ‘ready to flash’ light is green 

but the appliance still does not produce a flash when 

you press the flash button, contact the Consumer Care 

Centre in your countr y, your Philips dealer or a Philips 

ser vice centre.

The appliance becomes 

warm during use.

This is normal.

No action required.

The appliance does not 

show light intensity 1 

when I switch it on.

The appliance 

needs to be reset.

To reset the appliance, switch it off and on again. If the 

appliance still does not show light intensity 1, contact 

your Customer Care Centre, your Philips dealer or a 

Philips Ser vice Centre.

The appliance produces a 

strange smell.

The attachment 

and/or the filter 

glass is dir ty.

Clean the attachment carefully. If you are unable to 

clean the attachment properly, contact the Consumer 

Care Centre in your countr y, your Philips dealer or a 

Philips ser vice centre to replace the attachment.

EngliSh

25