Philips SC2001/01 - Инструкция по эксплуатации - Страница 21

 1 

 Switch off the appliance, unplug it and let it cool down.

Note: The light exit window becomes hot during use. Make sure it has cooled 

down before you clean it.

 2 

 To remove the attachment, put your fingers in the recesses at the 

top and bottom and pull gently. The attachment should come off 

easily.

 3 

 Moisten the soft cloth supplied with the appliance with a few drops 

of water and use it to clean the following parts:

 - the light exit window

 - the outside surface of the attachment

 - the metallic frame inside the attachment

Note: If water does not clean effectively, use a few drops of high-percentage 

alcohol to clean the parts mentioned above. 
Note: A contaminated light exit window and/or attachment can look like this 

picture. Make sure you clean the appliance before and after each use and, 

if necessary, also during the treatment according to the instructions in this 

section.

Tip: If it is no longer possible to clean the edges of the attachment with the 

enclosed cleaning cloth, use a cotton bud instead. Make sure that no fluff 

or fibres stay behind on the attachment or on the light exit window.

 4 

 If necessary, clean the outside of the appliance with the dry soft 

cleaning cloth supplied with the appliance.

Storage

 1 

 Switch off the appliance, unplug it and let it cool down.

 2 

 Clean the appliance before you store it.

 3 

 Put the appliance in the pouch supplied.

 4 

 Store the appliance in a dry place at a temperature between 0°C and 

60°C.

replacement

If you have to replace a par t or want to purchase an additional par t, go to 

your Philips dealer or visit www.philips.com/suppor t.

If you have problems obtaining the par ts, please contact the Philips 

Consumer Care Centre in your countr y.

replacement parts

The following replacement par ts are available:

 - Body attachment

 - Adapter

 - Pouch

EngliSh

21