Philips RQ1087 - Инструкция по эксплуатации - Страница 18

cleaning fluid level is too low. Clean the shaver thoroughly before you 

continue shaving. If necessar y, clean and refill the cleaning chamber 

(see chapter ‘Cleaning and maintenance’).

The shaving heads may be damaged or worn. Replace the shaving 

unit (see chapter ‘Replacement’).

  2 

 Why doesn’t the shaver work when I press the on/off button?

The batter y may be empty. Recharge the batter y (see chapter 

‘Charging’).

The travel lock may be activated. Press the on/off button for 3 

seconds to deactivate the travel lock.

The shaving unit is soiled or damaged to such an extent that the 

motor cannot run. In this case, the shaving unit symbol, the tap 

symbol and the exclamation mark flash. When this happens, you have 

to clean the shaving unit or replace it.

The temperature of the shaver may be too high. In this case, the 

shaver does not work and the exclamation mark on the display 

flashes. As soon as the temperature of the shaver has dropped 

sufficiently, you can switch on the shaver again.

 Why isn’t the shaver entirely clean after I cleaned it in the Jet Clean 

System?

The cleaning fluid in the cleaning chamber may be soiled. Empty and 

rinse the cleaning chamber.

The cleaning fluid level may be too low. If the fluid volume in the 

cleaning chamber drops below the minimum level during the cleaning 

program, the program abor ts.The cleaning light and the 

‘cleaning chamber empty’ symbol flash at inter vals and the holder 

returns to its star ting position. Refill the cleaning chamber with 

cleaning fluid up to the MAX indication (see chapter ‘Cleaning and 

maintenance’).

You may have used another cleaning fluid than the original Philips 

cleaning fluid. Only use HQ200 cleaning fluid.

 Why doesn’t the Jet Clean System work when I press the on/off 

button?

-

-

-

-

-

-

-

-

English

20