Braun 9390cc Series 9 - Инструкция по эксплуатации - Страница 9

9

Accessories

Braun recommends changing your shaver’s 
Foil & Cutter cassette every 18 months to maintain 
your shaver’s maximum performance.
Available at your dealer or Braun Service Centres:

•

Foil & Cutter cassette: 92S/92M  

•

Cleaning Cartridge: CCR

•

Braun Shaver cleaner spray

Environmental notice

Product contains batteries and / or recyclable 
electric waste. For environment protection, 
do not dispose of in household waste, but for 
recycling take to electric waste collection 
points provided in your country.

The cleaning cartridge can be disposed of with 
regular household waste.

Subject to change without notice.

Trouble -Shooting

Problem:

Possible reason:

Remedy:

Shaver

Shaver does not start when 
pressing the on / off button.

1.  The shaver can only be operated 

cordless.

2.  Travel lock is activated.

1.  Unplug the shaver.
2.  Press the on / off button for 3 seconds to 

unlock the shaver.

Charging does not start 
when connected to power 
socket or put in the Clean 
& Charge Station.

1.  Sometimes charging starts 

delayed (e.g. after long storage).

2.  Ambient temperature is out of 

valid range.

3.  Power supply is not plugged into 

the shaver properly.

4.  Shaver is not placed properly in 

the Clean & Charge Station.

1.  Wait a few minutes. Charging will start 

automatically.

2.  Recommended ambient temperature for 

charging is 5 °C to 35 °C.

3. Power supply needs to snap in.
4.  Contacts of the shaver need to align with 

contacts in the Clean & Charge Station.

Shaver does not charge 
completely and keeps 
blinking.

Ambient temperature is out of valid 
range.

Recommended ambient temperature for 
charging is 5 °C to 35 °C.

Unpleasant smell from the 
shaver head.

1. Shaver head is cleaned with 

water.

2. Cleaning cartridge is in use for 

more than 8 weeks.

1.  When cleaning the shaver head with water 

only use hot water and from time to time 
some liquid soap (without abrasive 
substances). Remove Foil & Cutter 
cassette to let it dry.

2.  Change cleaning cartridge at least every 

8 weeks.

Battery performance 
dropped significantly.

1.  Foil and cutter are worn which 

requires more power for each 
shave.

2.  Shaver head is regularly cleaned 

with water but not lubricated.

1.  Renew Foil & Cutter cassette.
2. If the shaver is regularly cleaned with 

water, apply a drop of light machine oil on 
top of the foil once a week for lubrication.

Shaving performance 
dropped significantly. 

1.  Foil and cutter are worn.
2.  Shaving system is clogged.

1. Renew Foil & Cutter cassette.
2.  Soak the Foil & Cutter cassette into hot 

water with a drop of dish liquid. Afterwards 
rinse it properly and tap it out. Once dry 
apply a drop of light machine oil on the foil.

Shaver head is damp.

1.  Drying time after automatic 

cleaning was too short.

2.   Drain of the Clean & Charge 

station is clogged.

1.  Wait until the drying process has been 

completed.

2.  Clean the drain with a wooden toothpick.

Clean & Charge Station

Cleaning does not start 
when pressing the start 
button.

1.  Shaver is not placed properly in 

the Clean & Charge Station.

2.  Cleaning cartridge does not 

contain sufficient cleaning fluid 
(display blinks red).

3.  Appliance is in stand-by mode.

1.  Insert shaver into the Clean & Charge

Station and push it to the rear side of the 
station (contacts of the shaver need to 
align with contacts in the station).

2.  Insert new cleaning cartridge. Press the 

start button again.

3.  Press the start button again.

Increased consumption of 
cleaning fluid.

Drain of the Clean & Charge station 
is clogged.

–  Clean the drain with a wooden toothpick.
– Regularly wipe the tub clean.

90605013_93XXcc_W&D_CEEMEA_Type_5793_S6-88.indd   9

90605013_93XXcc_W&D_CEEMEA_Type_5793_S6-88.indd   9

23.01.19   12:18

23.01.19   12:18

Business Use - P&G AUTHORIZED POA-00102673 Rev 001 Effective Date 2019-01-29 Printed 2019-08-27 Page 9 of 88