Braun 9350s - Инструкция по эксплуатации - Страница 12

12

Accessories

Braun recommends changing your shaver’s 
Foil & Cutter cassette every 18 months to maintain 
your shaver’s maximum performance.
Available at your dealer or Braun Service Centres:

•

Foil & Cutter cassette: 92S/92M

•

Braun Shaver cleaner spray

Environmental notice

Product contains batteries and / or recyclable 
electric waste. For environment protection, 
do not dispose of in household waste, but for 
recycling take to electric waste collection 
points provided in your country.

Subject to change without notice.

Trouble -Shooting

Problem:

Possible reason:

Remedy:

Shaver

Shaver does not start when 
pressing the on / off 
button.

1. The shaver can only be operated 

cordless.

2. Travel lock is activated.

1. Unplug the shaver.
2. Press the on / off button for 3 seconds to 

unlock the shaver.

Charging does not start 
when connected to power 
socket.

1.  Sometimes charging starts 

delayed (e.g. after long storage).

2.  Ambient temperature is out of 

valid range.

3.  Power supply is not plugged into 

the shaver properly.

1.  Wait a few minutes. Charging will start 

automatically.

2.  Recommended ambient temperature for 

charging is 5 °C to 35 °C.

3. Power supply needs to snap in.

Shaver does not charge 
completely and keeps 
blinking.

Ambient temperature is out of valid 
range.

Recommended ambient temperature for 
charging is 5 °C to 35 °C.

Unpleasant smell from the 
shaver head.

Shaver head is cleaned with water.

When cleaning the shaver head with water 
only use hot water and from time to time 
some liquid soap (without abrasive 
substances). Remove Foil & Cutter cassette 
to let it dry.

Battery performance 
dropped significantly.

1. Foil and cutter are worn which 

requires more power for each 
shave.

2. Shaver head is regularly cleaned 

with water but not lubricated.

1. Renew Foil & Cutter cassette.
2. If the shaver is regularly cleaned with 

water, apply a drop of light machine oil 
on top of the foil once a week for 
lubrication.

Shaving performance 
dropped significantly. 

1. Foil and cutter are worn.
2. Shaving system is clogged.

1. Renew Foil & Cutter cassette.
2.  Soak the Foil & Cutter cassette into hot 

water with a drop of dish liquid. After-
wards rinse it properly and tap it out. 
Once dry apply a drop of light machine oil 
on the foil.

Guarantee

We grant a 2 year guarantee on the product 
commencing on the date of purchase. W ithin the 
guarantee period we will eliminate any defects in the 
appliance resulting from faults in materials or 
workmanship, free of charge either by repairing or 
replacing the complete appliance at our discretion.

This guarantee extends to every country where this 
appliance is supplied by Braun or its appointed 
distributor.

This guarantee does not cover: damage due to 
improper use, normal wear and tear (e.g. shaver foil 
or cutter block) as well as defects that have a 

negligible effect on the value or operation of the 
appliance. The guarantee becomes void if repairs 
are undertaken by unauthorised persons and if 
original Braun parts are not used.

To obtain service within the guarantee period, hand 
in or send the complete appliance with your sales 
receipt to an authorised Braun Customer Service 
Centre (address information available online at 
www.service.braun.com).

For UK only:

This guarantee in no way affects your rights under 
statutory law.

90604906_93XXs_SOLO_W&D_Euro_Type_5793_S6-104.indd   12

90604906_93XXs_SOLO_W&D_Euro_Type_5793_S6-104.indd   12

18.01.19   10:34

18.01.19   10:34

Business Use - P&G AUTHORIZED POA-00101223 Rev 001 Effective Date 2019-01-23 Printed 2019-08-27 Page 12 of 104