Braun 9350s - Инструкция по эксплуатации - Страница 11

11

Battery status

The 

battery status

 is shown 

with segments and additionally 
in digits (for some models also 
with a battery icon). 

•

The status segments appear / 
disappear gradually with the 
status of the battery power. 

•

The digital number shows the 
remaining shaving time in 
minutes.

Plug reminder

(low charge / cordless operation only)

1.  Flashing: Battery is in 

low 

charge

, i.e. 5 minutes 

shaving time are left. 

2.  Fast flashing: This appliance 

can only be 

operated 

cordless

. Disconnect the 

shaver from the power supply 
before turning it on.

Travel lock

When the travel lock icon 
appears on the display, the 
shaver is locked.

Replacement indicator 
for Foil & Cutter cassette

The 

replacement indicator

shows the usage of the 
Foil & Cutter cassette. The 
status segments disappear 
gradually with the numbers of 
shaves*.

Cleaning indicator 

(with Clean & Charge station usage only)

The 

cleaning indicator

 lights 

up after each shave as 
a reminder that the shaver 
should be cleaned in the 
Clean & Charge Station.

*not with all models

Usage

Make sure that the shaver is disconnected from the 
power supply. Press the on / off button (4) to 
operate the shaver.

Tips for a perfect shave

1.  Position the shaver at the right angle (90°) 

to your skin.

2. Stretch your skin slightly with your hand.
3.  Shave against the direction of your beard growth.

Multi Head Lock switch

 (head lock)

The shaver head can be locked in five positions to 
shave hard-to-reach areas (e.g. under the nose).

•

Slide the Multi Head Lock switch (3) down to lock 
the shaver head. 

•

Move the shaver head manually to your desired 
position.

Precision trimmer

The trimmer can be used to trim sideburns, mous-
tache or beard.

•

Press the release button (8) and slide the trimmer 
(6) upwards.

Travel lock

The shaver can be locked to avoid unintended 
starting of the motor (e.g. for storing in a suitcase).

•

Press the on / off button (4) for 3 seconds to lock / 
unlock the shaver. This is confirmed by a beep 
sound and the lock icon appearing / disappearing 
on the display. 

Foil replacement

To maintain 100% shaving performance, replace the 
Foil & Cutter cassette (1), when the foil replacement 
indicator lights up (and no status segments are 
visible).

•

To remove the Foil & Cutter cassette press the 
release button (2).

•

Press the on / off button for 8 seconds to reset the 
counter.

•

Afterwards you need to unlock the shaver 
(see chapter «Travel lock»).

•

On some shaver models the replacement indicator 
will reset automatically after 7 shaves.

Cleaning

Cleaning under running water

Especially important after foam or gel usage

•

Switch on the shaver cordless and rinse the 
shaver head under hot running water until all 
residues have been removed.

 You may use liquid 

soap without abrasive substances. Rinse off all 
foam and let the shaver run for a few more seconds.

•

Next, switch off the shaver, press the release 
button (2) to remove the Foil & Cutter cassette (1) 
and let it dry.

•

If you regularly clean the shaver under water, 
apply a drop of light machine oil on top of the 
Foil & Cutter cassette once a week.

The shaver needs to be cleaned under running 
water after each foam or gel usage!

Cleaning with a brush

•

Switch off the shaver. Remove the Foil & Cutter 
cassette (1) and tap it out on a flat surface. Using 
the brush, clean the inner area of the pivoting 
head. Do not clean the cassette with the brush as 
this may damage it!

90604906_93XXs_SOLO_W&D_Euro_Type_5793_S6-104.indd   11

90604906_93XXs_SOLO_W&D_Euro_Type_5793_S6-104.indd   11

18.01.19   10:34

18.01.19   10:34

Business Use - P&G AUTHORIZED POA-00101223 Rev 001 Effective Date 2019-01-23 Printed 2019-08-27 Page 11 of 104