Braun 7680 - Инструкция по эксплуатации - Страница 13

13

• Slide down the contact bow to connect the shaver and 

to start the selected program.
If no program is selected, the default function «clean» will 
be started.

The display of the shaver shows the remaining time of 
the running program in 5-minute steps.

• Do not interrupt a running program, as it leaves the 

shaver wet and not fit for use. If interruption is needed 
nonetheless, press the release button.

• After a program has finished, the corresponding light will 

go out. Prior to the next shave, press the release button 
to release the shaver.

• When the «cartridge» light starts flashing, the remaining 

fluid in the cartridge is sufficient for approximately 5 
more cleaning cycles. After these 5 cycles, the cleaning 
performance will be reduced and the cartridge has to be 
replaced.

• When the «cartridge» light illuminates constantly, the 

cleaning function is locked and a new cartridge has to be 
installed.
Only then, the next cleaning cycle can be started.

• A cleaning cartridge should be sufficient for about 30 

cleaning cycles. With daily use, the cleaning cartridge 
should be replaced approx. every 4 weeks.

• The hygienic cleaning solution cartridge contains alcohol 

which, once opened, will naturally evaporate slowly into 
the surrounding air. Each cartridge, if not used daily, 
should be replaced after approximately 8 weeks.

• Clean the housing from time to time with a damp cloth, 

especially the opening where the shaver rests.

Accessories

Available at your dealer or Braun Service Centers:

Refill cartridge

 (double pack) CCR 2, (# 5331)

Subject to change without notice.

select

clean

char

ge

cartridge