Braun Oral-B iO - Инструкция по эксплуатации - Страница 7

7

•

This toothbrush is a personal care device 
and is not intended for use on multiple 
patients in a dental practice or institution. 
For hygienic reasons we recommend the 
use of individual brush handles and brush 
heads for each family member.

•

Small parts may come off, keep out of 
reach of children.

To avoid brush head breakage which may 
generate a small parts choking hazard or 
damage teeth:

•

Prior to each use, ensure the brush head fits 
well. Discontinue use of the toothbrush, if 
brush head no longer fit properly. Never use 
without a brush head.

•

If the toothbrush handle is dropped, the 
brush head should be replaced before the 
next use even if no damage is visible

•

Replace brush head every 3 months or 
sooner if brush head becomes worn.

•

Clean brush head properly after each use 
(see «Cleaning recommendations» para-
graph). Proper cleaning ensures the safe 
use and functional life of the toothbrush.

Important Information

•

This toothbrush, charger and pouch (acces-
sory) contain NdFeB magnets and generate 
magnetic fields. If you use a medical device 
or have an implanted medical device, con-
sult with the medical device manufacturer 
or a physician, if you have questions about 
safely using your Oral-B iO toothbrush.

•

Your Oral-B toothbrush can be used with 
your smartphone (find details under
«Connecting your toothbrush to your 
Smartphone»). To avoid electromagnetic 
interference and/or compatibility conflicts, 
disable 

Bluetooth

® on your toothbrush han-

dle (5) before using it in restricted sur-
roundings, such as aircrafts or specially 
marked areas in hospitals. 

•

Disable 

Bluetooth

 by entering the «Set-

tings» menu on the interactive display (4) 
-> 

Bluetooth

 -> disable. Follow the same 

procedure to enable 

Bluetooth

 again.

•

Persons with pacemakers should always 
keep the toothbrush more than 15 centime-
ters (six inches) from the pacemaker while 
turned on. Anytime you suspect interfer-
ence is taking place disable 

Bluetooth

.

Specifications

For voltage specifications refer to the bottom 
of the charging unit.

Noise level: 64 dB (A)

First use

Please wake up your toothbrush by pressing 
the on/off button (7) and follow the instruc-
tions on the interactive display (4) to get 
started for first time setup.
If not further instructed on the display, you 
may toggle with the mode button (8) and 
select with the on/off button (7).
You may change the settings via the «Set-
tings» menu (17) at any time.

Charging and Operating

•

To charge the battery place the toothbrush 
on the plugged-in charger (6).

•

The charge level is indicated on the interac-
tive display (4). Once it is fully charged the 
display turns off. 
A full charge typically takes 3 hours.

•

IIf the battery is running low the motor 
reduces its speed and the Smart Pressure 
Sensor (3) shortly blinks in red. Once the 
battery is empty, the motor stops; it will 
need at least a 5-minute charge for one 
usage.

Note: In case the battery is empty (display off), 
charge for at least 30 minutes.

•

You can always store the handle on the 
plugged-in charger to maintain it at full 
charge; a battery overcharge is prevented 
by the device.

Note: Store handle at room temperature for 
optimal battery maintenance.

Caution:

 Do not expose handle to tempera-

tures higher than 50°C / 122°F.

Using your toothbrush

Start Brushing

Place the brush head on the handle. A small gap 
should remain between handle and brush head. 
Lift the handle off the plugged-in charger 
or simply pick it up to wake up the handle 
(display turns on). Wet brush head and apply 
toothpaste. To avoid splashing, guide the 
brush head to your teeth before switching the 
handle on by pressing the on/off button.

Note: Display turns off after some time. 

91451394_SONOS_M7-9_120x170_EE.indd   7

91451394_SONOS_M7-9_120x170_EE.indd   7

31.08.20   08:08

31.08.20   08:08