Teka HCB 6535 SS - Инструкция по эксплуатации - Страница 31

31

User’s Guide 

English

temperatures reached inside the oven, accu-
mulated grease undergoes a carbonisation 
process. 
The general recommendation is to perform a 
pyrolytic cycle every 4-5 uses, using the most 
suitable programme according to the level of 
stains present in the oven. The more stained 
the oven, the longer the duration of the pro-
gramme. 
During the pyrolytic cycle the light inside the 
oven will remain off.

pRoGRaMMING  
THE pYRolYTIC FUNCTIoN

IMpoRTaNT

Before carrying out the pyrolysis, you must 
remove all accessories and dishes from the 
oven, including the shelves and/or telescop-
ic guide rails. To do this, follow the instruc-
tions in the installation and maintenance 
guide accompanying the oven.

WaRNING

Clean any spillages or excess dirt from the 
inside, as these could ignite during the py-
rolysis and create a fire hazard.  

WaRNING

Before running the pyrolytic function, ensure 
that the oven is properly closed.

1.

  Turn the cooking control dial to the Pyrolysis 

position 

.

2.

  TAfter a few seconds, the 

 symbol will 

light up on the clock display, reading ‘P2’ 
(Pyrolysis programme 2.

3.

  You can now change the pyrolysis pro-

gramme to P1, P2 or P3 by pressing the 

or 

 keys:

p1:

 Light pyrolysis. Lasts 1 hour.

p2:

 Regular pyrolysis. Lasts 1 hour 30 min.

p3:

 Intensive pyrolysis. Lasts 2 hours.

4.

  Once the desired programme has been se-

lected, press 

. The automatic door lock 

will be activated immediately.  

WaRNING

If the door is not properly closed, it will not 
lock and an alarm will sound.
If this happens, switch off the alarm by 
pressing any clock button, close the door 
properly, turn the function dial to the

po-

sition and re-select the pyrolytic programme 
as described above.

5.

  Once the door is locked, the

symbol will light 

up on the clock display and the time remaining 
before the end of the pyrolysis will appear.

IMpoRTaNT

At this point, the oven is programmed and 
the pyrolytic cleaning cycle is under way. 
During the cycle, none of the oven timer 
functions may be chosen (except the child 
lock). 
Do not try to open the oven door as this may 
interrupt the cleaning process.

6.

  When the pyrolytic cleaning cycle has fin-

ished, an alarm will sound, the 

 symbol 

will flash and you will see the time ‘0:00’ on 
the clock display.

7.

  Press any of the timer’s keys to disable the 

alarm.

8.

  Turn the control dial to the 

 position.

9.

  The oven’s heating process has finished.  

However, the oven is extremely hot and can-
not be used.

  The cooling process will continue to oper-

ate and the

symbol will remain lit until the 

oven cools down.