Teka HCB 6535 SS - Инструкция по эксплуатации - Страница 30

30

User’s Guide 

pyrolytic self-cleaning function

Function available in pyrolytic models HSB P. 

WaRNING

Before setting the pyrolytic cleaning cycle, 
carefully read the safety instructions, which 

you will find at the start of the Installation and 
Maintenance guide.

This function allows you to carry out a pyrolyt-
ic cleaning cycle during which, due to the high 

2.

  Gently pour 200 ml of water into the bottom 

of the oven cavity.

INFoRMaTIoN

For best results, add a teaspoon of mild 
washing up detergent to the glass of water 
before pouring onto the cloth. 

3.

  Turn the control dial to the 

 position.

4.

  You will hear a beep indicating that the Teka 

Hydroclean

®

 cycle has started. The 

 sym-

bol will flash slowly and the time remaining to 
complete the cycle will appear on the display.

IMpoRTaNT

The duration of this cycle cannot be changed. 
To stop the cycle before it is finished, turn 
the control dial to the 

 position.

5.

  When the cycle is finished, the oven will turn 

itself off, an alarm will sound and the 

symbol will flash quickly.

IMpoRTaNT

Do not open the oven door until the Hydro-
clean

®

 function is complete.

The cooling cycle is necessary for the func-
tion to work properly. 

6.

  Touch any sensor with your fingertip to stop 

the alarm and turn off the 

 symbol.

7.

  Turn the control dial to the   position.

8.

  Any traces of dirt and excess water can now 

be removed from the oven with the damp 
cloth.

The Hydroclean

®

 function takes place at a low 

temperature. However, cooling times can vary 
depending on the room temperature.

WaRNING

Before touching the inside surface of the 
oven, make sure that it has cooled properly.

If a deeper clean is required after using the Hy-
droclean

®

 function, use neutral detergents and 

non-abrasive sponges.