Kuppersberg KHT 616 - Инструкция по эксплуатации - Страница 37

37

ENGLISH

TECHNICAL PASSPORT

Вuilt-in compact electric oven

IMPORTANT

Important information for 

electrical connection

Appliance is equipped with

- a power cord with plug

Please note:

Appliance is supplied with a 16A 

power cord with plug. and must only 

be connected to a properly installed 

earthed socket.

Only  a  qualified  electrician  who 

takes the approriate regulations into 

account may install the socket or 

replace the connecting cable. If the 

plug is no longer accessible following 

installation, an all-pole isolating switch 

must be present on the installation side 

with a contact gap of at least 3 mm. 

Contact protection must be ensured by 

the installation.

Fuse protection: see instructions for 

use-technical data.

- a three-pin power cord

Please note:

Appliance is designed to be 

permanently installed with a three-pin 

power cord may only be connected by a 

licensed expert in accordance with the 

connection diagram. 

Only  a  qualified  electrician  who 

takes the relevant regulations into 

account may replace the power cord. 

Do not use multiple plugs, power 

strips or extensions. Overloading causes 

a  risk  of  fire.  If  the  connection  is  no 

longer accessible following installation, 

an all-pin isolating switch with a contact 

gap of at least 3mm must be provided.

The appliance must be protected 

using a fuse that is rated 16 A or higher. 

The appliance must be disconnected 

from the power supply

during all installation work. When the 

appliance is installed, protection must 

be provided against accidental contact 

in the future.

Connect the wires of the mains power 

cord in accordance with the following 

colour coding:

Green and yellow      Earth wire (E)

Blue                           Neutral wire (N) 

Brown                        Live (L)