Kuppersberg KHT 616 - Инструкция по эксплуатации - Страница 31

31

ENGLISH

TECHNICAL PASSPORT

Вuilt-in compact electric oven

IMPORTANT INFORMATION 

ABOUT INSTALLING

Â

This appliance is NOT intended 

for use in a commercial environment.

Â

Please observe the installation 

instructions provided and note that this 

appliance should only be installed by 

a quali fied technician.

Â

The  appliance  is  fitted  with 

a plug and must only be connected to 

a properly installed earthed socket.

Â

In case a new socket is needed, 

installation and cable connection 

must  only  be  done  by  a  quali  fied 

electrician. If the plug is no longer 

accessible following installation, a pole 

disconnecting device must be present 

on the installation site with a contact 

gap of at least 3 mm.

Â

Adapters, multi-way strips and 

extension cords must not be used. 

Overloading can result in fire.

Â

If the appliance is not fitted with 

a supply cord and a plug, the connection 

equipment must have a contact 

separation in all poles that provide full 

disconnection, and the appliance must 

be  incorporated  in  the  fixed  wiring  in 

accordance with the wiring rules. 

FITTED UNITS

Â

This appliance is only intended 

to be fully fitted in a kitchen.

Â

This appliance is not designed 

to be used as a tabletop appliance or 

inside a cupboard.

Â

The fitted cabinet must not have 

a back panel behind the appliance.

Â

A gap of at least 45 mm must be 

maintained between the wall and the 

base and back panel of the unit above.

Â

The  fitted  cabinet  must  have 

a ventilation opening of 250 cm

2

 on the 

front. To achieve this, cut back the base 

panel or fit a ventilation grille.

Â

Ventilation slots and intakes 

must not be covered.

Â

The safe operation of this 

appliance can only be guaranteed if it 

has been installed in accordance with 

these installation instructions.

Â

The fitter is liable for any damage 

resulting from incorrect installation.

Â

The units into which the 

appliance  is  fitted  must  be  heat-

resistant up to 95 

o

C.