Kuppersberg FH 911 B - Инструкция по эксплуатации - Страница 17

Духовые шкафы Kuppersberg FH 911 B - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 52
Загружаем инструкцию
background image

17

ENGLISH

Built-in ovens

TECHNICAL PASSPORT

E R RO R  I N D I CAT I O N S:

When  situations  occur  that  prevent 

normal  operation,  the  device  goes  into 

error mode. The device is in the standby 

state, but an error code is shown on the 

time  of  day  display.  Even  if  the  error  is 

recovered, this code will remain on the 

display until the 

 key is touched. 

There  are  a  total  number  of  8  error 

codes:

In the case of an error message:

If  these  errors  cannot  be  solved  by 

tapping the 

 

button,

try  to  disconnect  the  oven  from 

the  mains  and  connect  it  again  after 
2 minutes.

If  this  does  not  work,  contact  the 

nearest service centr

e.

ERROR 

CODE

DEFINITION OF ERROR AND POSSIBLE CAUSES

ERR 1

Communication error between the UM and PM cards

DKB2-XX-POC400 the data cable connector may be detached on both sides

DKB2-XX-POC400 the data cable may be defective

POC 400 PM may be defective

ERR 2

Oven cavity circuit temperature sensor open

PT-1000-M2-XXX the sensor connector may be detached on the PM

PT-1000-M2-XXX the sensor may be defective

POC 400 PM may be defective

ERR 3

Oven cavity circuit temperature sensor open

PT-1000-M2-XXX the sensor may be defective

POC 400 PM may be defective

ERR 4

Front panel temperature limit exceeded

The UM temperature has exceeded the limit (100C°), check the POC 400 UM 

cooling fan, it may be faulty

ERR 5

PM temperature limit exceeded

The temperature of the PM has exceeded the limit (105°).

POC 400 PM may be defective

ERR 6

UM heat sensor error

POC 400 UM may be defective

ERR 7

PM heat sensor error

POC 400 PM may be defective.

ERR 8

No temperature adjustment

Check the heating elements and connections

POC 400 PM may be defective

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к Kuppersberg FH 911 B?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"